Malt_Vinegar
Dirt Disciple
Great thread.
Is there an overview of all the parts needed, and what you have used?
Is there an overview of all the parts needed, and what you have used?
FSR frame bearing upgrade - DIY - *Pg 1 for updates/pics*
- Thread starter twain
- Start date
Re:
I'll see if I can put together a comprehensive list of parts soon! I don't get anytime to play with bikes at the moment, lack of space and even less time.....may be a while before I can let rip and get it apart to check it over which is when ill do a parts list.
I'll see if I can put together a comprehensive list of parts soon! I don't get anytime to play with bikes at the moment, lack of space and even less time.....may be a while before I can let rip and get it apart to check it over which is when ill do a parts list.
valve bouncer
Retro Guru
valve bouncer
Retro Guru
Malt_Vinegar
Dirt Disciple
Interesting, needle bearings with a bush.
Will see what I can to copy!
Will see what I can to copy!
Finished checking my bearing conversion this afternoon, i have done a lot of miles on this now since i fitted them a good few years ago.
The only ones that were worn were the ones at the top of the seat stay, the rest are in such good condition that i have left the old ones in place.
Perfect
The only ones that were worn were the ones at the top of the seat stay, the rest are in such good condition that i have left the old ones in place.
Perfect
Hi all,
What did you all use to remove the existing bearings etc from the linkage?
Mine are shot. Someone before me made this 98 Elite into a white-painted, semi-DH, gnarly machine and rode the crap out of it. The top hat washers are toast, so any help there would be most appreciated.
I have emailed BETD but they're not hopeful they have anything in. I need the pivot set and and the bushings but am tempted to use your needle bearing suggestions and see how I go.
What did you all use to remove the existing bearings etc from the linkage?
Mine are shot. Someone before me made this 98 Elite into a white-painted, semi-DH, gnarly machine and rode the crap out of it. The top hat washers are toast, so any help there would be most appreciated.
I have emailed BETD but they're not hopeful they have anything in. I need the pivot set and and the bushings but am tempted to use your needle bearing suggestions and see how I go.
Similar threads
Latest posts
-
-
-
-
91 Salsa A La Carte (Nukeproof / XT / M231 etc etc)- Latest: Sherpamustache
-
