Anybody seen a quadruple chainset before?

orange71

Retrobike Rider
Gold Trader
Feedback
View
I haven't :shock:

http://cgi.ebay.co.uk/quadruple-chainse ... dZViewItem

22a5_1.JPG
 
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
key thing - why??

Already plenty of overlap on rear, even with roady blocks. If range increased, ok. Butg its not.
 
One of my local bike shops sold a 'orrible cheap thing with that chainset (or similar) - IIRC it only had a 6sp on the back, & it did indeed weigh about 8 tonnes.
 
Ziggy":1mpussu5 said:
One of my local bike shops sold a 'orrible cheap thing with that chainset (or similar) - IIRC it only had a 6sp on the back, & it did indeed weigh about 8 tonnes.

I think i remember seeing such a steed :LOL:
 
one-eyed_jim":enweq4q6 said:
Have a Google for "Mountain Tamer Quad"

Yes, a popular advert that used a bullseye crank from memory.
The extra granny ring was a 20 tooth I think.
 
Benandemu":2kycs7xi said:
Yes, a popular advert that used a bullseye crank from memory.
The extra granny ring was a 20 tooth I think.
Potentially as low as 16. They used Suntour splined freewheel sprockets.

http://www.abundantadventures.com/mt_plus.html

Here's one on a tandem:

http://mgagnon.net/velo/pedalier4.en.shtml

There was also the Avid Microdapter that converts a 74mm granny ring fitting to 56mm, letting you run a 20t microdrive grany gear. I'm looking for one.

In principle, a Campag Record OR crank could be used with four cogs: one normal chainring, two splined cassette sprockets, and a track cog replacing the lockring. I'm not sure the lockring thread would hold up to the punishment though...
 
Back
Top