Marzocchi Bomber Z5 Air/Oil forks (1998) [SOLD]

rugbymtbr · Sep 17, 2020

Marzocchi Bomber Z5 Air/Oil forks (199

These have had a:

- Full strip down and degrease
- Paint removed from legs and brace
- Resprayed with etch primer and black gloss
- Stancion and brace bolts replaced with stainless steel bolts
- Lower seals replaced
- Refill with 7.5w fork oil and pressurized to 30 psi
- New Decals fitted

Suitable for 26 inch wheels with quick release hub.

Will take either cantilever/V brake or disc brake. V Brake mounts included (but not shown in photos)

Steerer tube is approx 200mm in length.

Let me know if you have any questions.

£[SOLD] + P&P

oldave · Sep 23, 2020

Re:

Apologies for ignorance, but 1 or 1 1/8 steerer? If the latter, axle to crown length? Thanks.

rugbymtbr · Sep 23, 2020

Re:

Sorry, I didn’t notice that I hadn’t stated the steerer diameter - my mistake. It’s 1 1/8”.

For the axle to crown length I’m not 100% clear on how to measure that for you - but happy to do it in the morning.

Just to clarify, is that measurement from the centre of the axle, to the base of the crown (i.e. where the bottom of the crown race would be seated)?

oldave · Sep 23, 2020

Re:

Thanks and yes, centre of axle to where crown race seats.

rugbymtbr · Sep 24, 2020

Re:

Hi Dave,

Measured this morning. It is 437mm from the centre of the axle to the top of the crown brace (crown race seat location).

Anything else you need, let me know.

oldave · Sep 25, 2020

Re:

Thanks and sorry for delay in replying. Too short for my geometry I think so will have to pass. GLWS, they look very nice!

rugbymtbr · Oct 9, 2020

Re: Marzocchi Bomber Z5 Air/Oil forks (199

Now Sold

Marzocchi Bomber Z5 Air/Oil forks (1998) [SOLD]

rugbymtbr

Retro Newbie

oldave

rugbymtbr

Retro Newbie

oldave

rugbymtbr

Retro Newbie

oldave

rugbymtbr

Retro Newbie

Similar threads

Latest posts