SOLD // 16" KING KAHUNA 1998 TITANIUM (KONA CUSTOM)

KONA KING KAHUNA TITANIUM FRAME (KONA CUSTOM)

Very good condition, near perfect!
Very few miles.
Only a few marks on the chain area near bottom bracket but any structural damage (see pics)

Original Titanium Sandvik 3Al-2,5V (with 6Al/4V head tube, bottom bracket, dropouts and rear disc brake tab)
16" size (center to top)
Includes rare original rear disc tab welded by KONA as original extra equipment (KONA CUSTOM)
Joe Murray geometry.

A VERY RARE SIZE in this condition and wit original rear disc tab… you know it.
S/N: KK16026

New original decals from GIL

Includes NOS CHRIS KING ahead set in Black and NOS THOMSON seat collar.

With the frame I Will add a special NOS SCOTCH BRITE hand pad 07447 specific to clean titanium and mantain its perfect aspect.

Possibility of getting the frame with a FOX F80 RL FORK in very good condition and in a good working order (locking system works good and without any oil leaks). Steerer tube is very long and includes 6 titanium rings (spacers)

AVAILABLE KITS:
- Kit 1: King Kahuna Frame + CK Ahead Set + THOMSON seat collar:
600 € + shipping

- Kit 2: King Kahuna Frame + CK Ahead Set + THOMSON seat collar + FOX F80 RL:
700 € + shipping

Contact by PM any doubt you have.

Re: VGC KONA KING KAHUNA 1998 TITANIUM FRAME (KONA CUSTOM)

Some pics of the TI JEWEL...

Re: VGC KONA KING KAHUNA 1998 TITANIUM FRAME (KONA CUSTOM)

More pics…

Re: VGC KONA KING KAHUNA 1998 TITANIUM FRAME (KONA CUSTOM)

More pics…

Re: VGC KONA KING KAHUNA 1998 TITANIUM FRAME (KONA CUSTOM)

More pics…

Re:

Hello there, that is a lovely looking frame that you have there, and an interesting addition to the description;

"Original Titanium Sandvik 3Al-2,5V front triangle and 6Al/4V rear triangle"

The serial number KK16026 would indicate that it is a standard 3AL-2.5V frame. The 6-4 Rear Triangle was indeed a feature of the 1996 King Kahuna, and had a -64 Suffix to the Serial Number, similar to the example below:



Pip

Re: Re:

pipmeister":2yzuvm30 said:

Hello there, that is a lovely looking frame that you have there, and an interesting addition to the description;

"Original Titanium Sandvik 3Al-2,5V front triangle and 6Al/4V rear triangle"

The serial number KK16026 would indicate that it is a standard 3AL-2.5V frame. The 6-4 Rear Triangle was indeed a feature of the 1996 King Kahuna, and had a -64 Suffix to the Serial Number, similar to the example below:


Pip

Click to expand...

Hello! Yes, it´s true. I forgot this detail. I always thought that all 97 and later KK had rear triangle in 6-4 despite not being specified in the S/N. I always thought that only in the 96KK it was necessary to specify it in the S/N adding the "-64" text at the end of S/N because in this period 96KK had the same S/N format than the Hei Hei (S/N starting by "B") and both models were in the brochure of that year. So, from 97 (when KK had their own S/N format starting by "KK") I always thought that all of KK had rear triangle in 6-4 Titanium… but probably I was wrong. But, according what I read, what it is true it's that the only pieces made of 6-4 Titanium in the frame are head tube, bottom bracket, dropouts and rear disc brake tab.

To avoid confusions I am going to modify the description of my frame…

Regards.

Re: REDUCED! VGC KONA KING KAHUNA 1998 TITANIUM (KONA CUSTOM)

PMs replied.

Re: CHRISTMAS OFFER! KONA KING KAHUNA 98 TITANIUM (KONA CUSTOM)

CHRISTMAS OFFER!!!

Re: CHRISTMAS OFFER! KONA KING KAHUNA 98 TITANIUM (KONA CUSTOM)

So much want.... but I cant right now
GLWS

Hope it goes to a good home!