FS: Commencal Meta Frame, Inbred Frame, Salsa seat QR

spacehopper

Senior Retro Guru
Feedback
View
FS: Commencal Meta Frame, Inbred Frame, Salsa seat QR

2012 Commencal Meta 55 Frame - Medium - £140 posted SOLD

In overall good condition, a few paint chips here and there..
Cable stops drilled out for a full run of outer cable (outer cable included) for the Rear Mech..
Sugru on bits of the frame to prevent cable rub etc
Lezyne Swingarm Protector included
On-One Seatpost + specialized clamp included
Token Headset included with spare bearing
Spare linkages (grey in colour) and main pivot axle included
Main pivot bearings upgraded to EZO bearings and all are running lovely and smooth!
Rear dropouts are 135X10 QR but can be swapped out for bolt through options (they can be found on ebay now and again..)
Original JMC Ride Free Sticker..!

On-One Inbred 456 Frame - 16" - £89 posted SOLD

In overall good conditions, a few minor scuffs here and there..
Was originally 'That Blue' but has been excellently powder coated a couple of years ago a very dark graphite (its pretty much black..) with tiny tiny gold flakes added to add a little sparkle.. by LSN powder coaters in Castleford.
Its not in anyway bling bling.. you cant see the flakes individually unless you look really closely.. its very stealthy but with a glimmer of... ooo that's nice.. :cool:
Cable guides have been modified on the top tube to allow brake hoses to be clipped in and out.. (with the full metal loop in place.. you had to remove the olive and barb to get shimano hoses through!
Sugru on bits of the frame to prevent cable rub etc
comes with an FSA Orbit 1 1/8th MX Headset in excellent condition
A cut -down, pretty worn but still very useable On-one twelfty seatpost
160mm Rear disc mount
bolt on V-brake bosses

Salsa seat quick release £17 posted SOLD
Black, 30.0
in good condition
fits the inbred frame above.
 
Re:

Commencal is now sold..

For reference they take a 200*51 shock as standard for 140mm travel..

But a 200*57 also works to give 160..

I ran it with a custom 200*54 (57 with a reducer spacer) for 150mm.

Ive kept the shock as i plan to use it on the commencals replacement.. :)
 
Back
Top