Retrobike
http://www.retrobike.co.uk/forum/

Hope Mono Mini, Hope BigUn 24" DMR wheels, bars and stem
http://www.retrobike.co.uk/forum/viewtopic.php?f=39&t=378022
Page 1 of 2

Author:  coreygun [ Wed Dec 27, 2017 3:38 pm ]
Post subject:  Hope Mono Mini, Hope BigUn 24" DMR wheels, bars and stem

Hope Mono Mini brakes - front and rear - Work very well, lots pad life left, very good condition. Calipers fit 160mm discs. Hoses are 92cm & 140cm. - £69 SOLD

Hope/DMR 24" wheels - Hope Big'un front (blue) & Shimano SLX (black) hubs on DMR Backline rims. Straight and no dings, REAR: cassette, normal 10mmx135mm size (non QR), FRONT: 20mm, one front hub bearing needs replacing - new spare bearing provided. One DMR MotoDigger tyre included. - £45 (+£8 posted)

Rockrider Comp bars and TranzX stem - (which is just a rebranded Azonic World Force stem) 50mm reach, 25.4 clamp, polished with a bit of black overspray on a bit next to the bars. Can be cleaned off with the right stuff, white spirit or something. Bars are 650mm wide, 30mm rise. Both for £15 (+£3 posted)
Hi rise cruiser bars - Just bought these but they're a bit high for my MTB. 22.2mm clamp so for BMX stems. Fitted once and ridden down my road, but thats it. 660mm wide, 80mm rise, black - £10 (+£3 posted)
Profile Imperial chainrings - 40t and 41t - Used but not much tooth wear. - £15 each SOLD

All items can be collected from West London, or posted at the aforementioned prices.

Image
Image
Image
Image

Author:  coreygun [ Thu Jan 04, 2018 12:26 am ]
Post subject:  Re: Hope Mono Mini, Hope BigUn 24" DMR wheels, bars and stem

Still available

Author:  RustyGold [ Thu Jan 04, 2018 9:41 am ]
Post subject:  Re:

I'm interested in the BMX cruiser bars; however, may I ask if there's any backsweep to speak of, if so do you know to what degree?

Author:  coreygun [ Thu Jan 04, 2018 11:13 pm ]
Post subject:  Re: Re:

RustyGold wrote:
I'm interested in the BMX cruiser bars; however, may I ask if there's any backsweep to speak of, if so do you know to what degree?


Yes there, is pretty average amount. I can measure it tomorrow if you like.

Author:  RustyGold [ Fri Jan 05, 2018 2:08 am ]
Post subject:  Re:

That'd be cool, if it isn't too much of an annoyance; alternatively, should it prove easier, take a picture to illustrate the sweep (I don't need an exact amount, just an notion)

Author:  coreygun [ Fri Jan 05, 2018 11:48 pm ]
Post subject:  Re: Re:

RustyGold wrote:
That'd be cool, if it isn't too much of an annoyance; alternatively, should it prove easier, take a picture to illustrate the sweep (I don't need an exact amount, just an notion)


I wouldn't know how to get the exact angle without getting out a protractor, ruler, string, weight...

So I took a photo. It's about 1 - 1.5" pull back.

Image

Author:  coreygun [ Wed Jan 17, 2018 11:24 pm ]
Post subject:  Re: Hope Mono Mini, Hope BigUn 24" DMR wheels, bars and stem

boom.

Author:  stevet1 [ Tue Jan 23, 2018 3:16 pm ]
Post subject:  Re:

Cheeky £25 posted for the mono mini brake?

Author:  coreygun [ Tue Jan 23, 2018 3:22 pm ]
Post subject:  Re: Re:

stevet1 wrote:
Cheeky £25 posted for the mono mini brake?


Nah sorry, I'd rather keep it as a spare. These calipers and levers individually are £25 each on ebay, so I don't think I need to drop the price any more for a complete brake.

Author:  coreygun [ Sun Jan 28, 2018 11:00 pm ]
Post subject:  Re: Hope Mono Mini, Hope BigUn 24" DMR wheels, bars and stem

bump

Page 1 of 2 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/