Retrobike
http://www.retrobike.co.uk/forum/

FS> Hope 27.5 wheels inc tyres, bars/stems/mechs
http://www.retrobike.co.uk/forum/viewtopic.php?f=39&t=374793

Author:  jonnyboy666 [ Fri Oct 06, 2017 6:46 pm ]
Post subject:  FS> Hope 27.5 wheels inc tyres, bars/stems/mechs

Edit! more stuff added! :)


so i have a bit of stuff for sale, will add to this post later when i have taken a few more pics of stuff but first here are some wheels i have for sale:-

Hope Evo 2 hubs on mavic rims, stainless steel spokes with brass nipples.

the hubs spin fine and the have been taken care of over the last couple of years and currently have a steel freehub body so you can fit any cassette you like, although i have been running a 10 speed i'm not sure if these will take an 11, so i'll check tomorrow, the bearings are fine and the rims spin nice and straight.

they are currently set up for 15mm bolt through front and 142 x 12 rear but i think i have some different ends if you want standard QR front and rear as these hubs can be made to fit several options.


the tyres are Maxis High roller2 2.3" up front and a Ardent 2.25" on the rear, both have plenty of wear left and are currently running tubes although they are tubeless compatible, i just never got around to doing it.

i want £200posted for these, no offers as i think it's a good price with the tyres etc.

pics
ImageIMG_8007 by Dr. Branom, on Flickr

ImageIMG_8014 by Dr. Branom, on Flickr

ImageIMG_8015 by Dr. Branom, on Flickr

ImageIMG_8008 by Dr. Branom, on Flickr

ImageIMG_8016 by Dr. Branom, on Flickr

ImageIMG_8009 by Dr. Branom, on Flickr

ImageIMG_8010 by Dr. Branom, on Flickr

ImageIMG_8017 by Dr. Branom, on Flickr


shimano SLX 10 speed rear mech, pretty good condition, was on my fat bike but i've upgraded to 11speed on that, has XT jockey wheels £30 SOLD ON EBAY

ImageIMG_8419 by Dr. Branom, on Flickr

ImageIMG_8420 by Dr. Branom, on Flickr

shimano XT 10 speed rear mech with Hope Jockey wheels, this was on my Orange 5 but have upgraded to 11 speed, few wear marks but functions fine £45
ImageIMG_8421 by Dr. Branom, on Flickr

ImageIMG_8422 by Dr. Branom, on Flickr

as you can see the ano has worn a bit form use but the teeth aren't worn yet
ImageIMG_8424 by Dr. Branom, on Flickr

10 speed deore shifter £12 SOLD ON EBAY
ImageIMG_8425 by Dr. Branom, on Flickr


Easton EA70 stem 100mm x 6 degree x 31.8mm, £10
ImageIMG_8436 by Dr. Branom, on Flickr
ImageIMG_8437 by Dr. Branom, on Flickr
ImageIMG_8438 by Dr. Branom, on Flickr
ImageIMG_8439 by Dr. Branom, on Flickr

Xlite riser bar, uncut at 630mm £10
ImageIMG_8440 by Dr. Branom, on Flickr
ImageIMG_8441 by Dr. Branom, on Flickr
ImageIMG_8442 by Dr. Branom, on Flickr

FSA carbon flat bar, 600mm, 25.4mm slight sweep there is some slight damage to one end but i had in a bike for quite a while like this with no issues, damage is pictured £15
ImageIMG_8446 by Dr. Branom, on Flickr
ImageIMG_8447 by Dr. Branom, on Flickr
the damage:-
ImageIMG_8448 by Dr. Branom, on Flickr

Specialized silver flat bar uncut at 600mm wide, 25.4 £10
ImageIMG_8449 by Dr. Branom, on Flickr
ImageIMG_8450 by Dr. Branom, on Flickr
ImageIMG_8451 by Dr. Branom, on Flickr
ImageIMG_8452 by Dr. Branom, on Flickr

RaceFace flat bar uncut at 575? odd measurement! £10
ImageIMG_8453 by Dr. Branom, on Flickr
ImageIMG_8454 by Dr. Branom, on Flickr
ImageIMG_8455 by Dr. Branom, on Flickr


Thomson stem, new stainless bolts fitted, 10 degree x 90mm x31.8mm, £30 SOLD :D

Author:  RobMac [ Fri Oct 06, 2017 10:54 pm ]
Post subject:  Re:

Jon what's the inside width of the rims on the Hope wheels or put it another way what's the widest tyre they'll take?

Author:  jonnyboy666 [ Fri Oct 06, 2017 11:14 pm ]
Post subject:  Re:

if memory serves, the rims are xm319's, this means that the internal measurement is 19mm, i put 2.4 High Rollers on them a while ago with no issues, frankly i have run 2.5's on xc517's before so these should be ok up to 2.5 i'd say

Author:  jonnyboy666 [ Thu Oct 19, 2017 3:59 pm ]
Post subject:  Re:

bumping this advert, and also, i checked and the hope hub will take an 11 speed xt cassette

Author:  jonnyboy666 [ Thu Dec 14, 2017 4:34 pm ]
Post subject:  Re:

bump bump bumpety bump! :)

Author:  RickTheUncivil [ Fri Dec 15, 2017 8:03 am ]
Post subject:  Re: FS> Hope 27.5 wheels inc tyres

How noisy are these? Daft question but my older pro 2 make a right racket!

Author:  jonnyboy666 [ Fri Dec 15, 2017 1:10 pm ]
Post subject:  Re:

hey Rick,

Hope hubs tend to louder than most, having just given them a spin to gauge the loudness i would say in terms of Hope hubs these are somewhere in the middle, i have friends who run hardly any lube in the freehub to increase the sound and others who put in loads to reduce or dampen the sound, so they can sort of be changed but at best it makes only a little difference. i have never found these to be irritating though, personally i hate the angry bee sound from king hubs so each to their own i guess! :)

go on, you know you want them! :wink:

Author:  RickTheUncivil [ Fri Dec 15, 2017 1:54 pm ]
Post subject:  Re: Re:

jonnyboy666 wrote:
go on, you know you want them! :wink:


want? yes. afford? not today.
Will keep my eyes on though :D

Author:  jonnyboy666 [ Mon Dec 18, 2017 12:21 pm ]
Post subject:  Re:

new stuff added bump! :D

Author:  jonnyboy666 [ Thu Dec 21, 2017 10:29 am ]
Post subject:  Re:

no interest? or is it a xmas thing? selling due to big project on the horizon!

bump :)

Author:  velofrog [ Thu Dec 21, 2017 1:12 pm ]
Post subject:  Re:

PM incoming for Thomson stem :xmas-cool:

Author:  jonnyboy666 [ Fri Dec 29, 2017 1:48 pm ]
Post subject:  Re:

figured i might as well bump this thread as well :D

Author:  wicket [ Sat Dec 30, 2017 7:06 pm ]
Post subject:  Re:

Pm sent re easton stem

All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/