I have this brake set for sal
Front an rear hope mono 6 ti calipers
With tech 2 levers an braided hoses
Front brake works ok an has it own specific adaptor making it is mount
The rear is standRd post mount ( can be fitted to post mount is adaptor )
I had to snip the hose to remove it from my frame so this brake requires a new banjo fitting an bleeding
When I bled these I used this method 1 st bleed with reach adjust an bite point all the the way out once the brake feels good set the reach an bite point where you want it then re bleed otherwise it feels spongey
£140 posted
Front an rear hope mono 6 ti calipers
With tech 2 levers an braided hoses
Front brake works ok an has it own specific adaptor making it is mount
The rear is standRd post mount ( can be fitted to post mount is adaptor )
I had to snip the hose to remove it from my frame so this brake requires a new banjo fitting an bleeding
When I bled these I used this method 1 st bleed with reach adjust an bite point all the the way out once the brake feels good set the reach an bite point where you want it then re bleed otherwise it feels spongey
£140 posted
