futuristicoldman
Senior Retro Guru
- Feedback
- View
Heres a 140mm fox 32 fit fork for a 26" wheel with 188mm tapered steerer for spares/repair, they had a damaged disc tab so the lowers were thrown away pending the arrival of a new set of lowers. The lowers shown are from a 120mm fork so the lower bushes would need to be raised by 20mm if the fork was to be used as shown. There is some wear to the dropouts where a hub with "aggressive end caps" and tight bearings has been used.
Anodising on the uppers is fine are the internals.
Great for the person with a fork that has worn stanchions and would like to upgrade their internals with the better quality fit damper. Personally I wouldn't bother fettling the lowers as the dropouts are a bit tired.
£45 posted within mainland UK, highlands and islands will be quite a chunk more.
Ta
D
**********Call it £35 posted**********
NOW SOLD
Anodising on the uppers is fine are the internals.
Great for the person with a fork that has worn stanchions and would like to upgrade their internals with the better quality fit damper. Personally I wouldn't bother fettling the lowers as the dropouts are a bit tired.
£45 posted within mainland UK, highlands and islands will be quite a chunk more.
Ta
D
**********Call it £35 posted**********
NOW SOLD