D
Deleted member 4805
Excellent condition set of very expensive DT Swiss wheels, DT 440 Hubs and DT EX500 Rims, 26" wheels. The rims only have a few very small marks to them, the rear hub has some scratches but these are just on the end caps not the hub body, the freehub has a few cassette marks as seen on all wheels.
Currently set up s 15mm front and 135mm / QR rear.
Tioga Yellow Kirin Tyres front and rear, front is good but rear pretty worn although usable.
You can get 20mm or QR adaptors for the front and the rear can be changed to pretty much any standard ( Except 150m ) with either different caps or axles. CRC stock most of these.
£160 ono collected Surrey or postage on top which would be about £15
Front bearings feel prefect , rear free hub bearings feel perfect,rear hub has just had the two bearings replaced.
The 440 hubs are the most expensive MTB hubs made by DT Swiss, front hub retail is £185, rear hub £280, rims £60 each plus spokes, so you were looking at around £650 built + cost of tyres though you would of course been able to get some discount of RRP prices but it gives you an indication of high quality they are.
Tubeless compatible when used with a sealing kit.
Lots of information and reviews on the internet regarding these wheels.
Currently set up s 15mm front and 135mm / QR rear.
Tioga Yellow Kirin Tyres front and rear, front is good but rear pretty worn although usable.
You can get 20mm or QR adaptors for the front and the rear can be changed to pretty much any standard ( Except 150m ) with either different caps or axles. CRC stock most of these.
£160 ono collected Surrey or postage on top which would be about £15
Front bearings feel prefect , rear free hub bearings feel perfect,rear hub has just had the two bearings replaced.
The 440 hubs are the most expensive MTB hubs made by DT Swiss, front hub retail is £185, rear hub £280, rims £60 each plus spokes, so you were looking at around £650 built + cost of tyres though you would of course been able to get some discount of RRP prices but it gives you an indication of high quality they are.
Tubeless compatible when used with a sealing kit.
Lots of information and reviews on the internet regarding these wheels.
