for sale is my boss' scott scale 15. it's as simple as it doesn't get used much since he got his racer.
the bike has covered no more than a couple hundred miles since being built and most parts were brand new when the bike was built
size I think is 17.5 but will confirm on monday
link to pics http://www.flickr.com/photos/98781386@N02/
any questions or if you want more pics just let me know but I won't answer until Monday as i'm off to the VW show for the weekend
Frame: scott scale 15 HMF, weighs in at an impressive 899 grams!
Fork: ritchey carbon, new when fitted
Headset: cane creek
Stem: EDGE carbon 31.8 fitment, new when fitted
Handlebar: carbon monkey lite,new when fitted
Grips: superstar
Brakes: Hope X2 Race,new when fitted
Shifters: shimano XT 2x10,new when fitted
Front Derailleur: XTR
Rear Derailleur: XT,new when fitted
Derailleur Cables: shimano XT,new when fitted
Cassette: shimano XT,new when fitted
Chain: KMC x10, new when fitted
Cranks: Race Face Turbine 2x10,new when fitted
Bottom Bracket: Race Face external BB,new when fitted
Pedals: Fatties Flatties,new when fitted
wheels, new when fitted
Skewers: Hope
Rims: DT Swiss EX500
Hubs: Hope Pro 2 Evo
Spokes: DT swiss
Tyres: continental travel contact, 26x1.75
Tubes:
Saddle: ProLogo with NACK carbon rails,new when fitted. the problem with this is, as you can see form the pics, it has a zip tie holding the the nose of the seat to the rails as the bit of plastic which holds it fell out, got glued back in and it's still there but didn't want to take any chances. will post some pics on monday
Seatpost: Ritchey WCS carbon,new when fitted
Seatpost Binder: unbranded
asking price is £1200 posted within uk, overseas extra at cost
regarding paypal fees, I will split them with the buyer
would be willing to split if I got 100% definite yes' on most parts, i.e frame, forks, wheels and cranks but buyer must pay the fees
the bike has covered no more than a couple hundred miles since being built and most parts were brand new when the bike was built
size I think is 17.5 but will confirm on monday
link to pics http://www.flickr.com/photos/98781386@N02/
any questions or if you want more pics just let me know but I won't answer until Monday as i'm off to the VW show for the weekend
Frame: scott scale 15 HMF, weighs in at an impressive 899 grams!
Fork: ritchey carbon, new when fitted
Headset: cane creek
Stem: EDGE carbon 31.8 fitment, new when fitted
Handlebar: carbon monkey lite,new when fitted
Grips: superstar
Brakes: Hope X2 Race,new when fitted
Shifters: shimano XT 2x10,new when fitted
Front Derailleur: XTR
Rear Derailleur: XT,new when fitted
Derailleur Cables: shimano XT,new when fitted
Cassette: shimano XT,new when fitted
Chain: KMC x10, new when fitted
Cranks: Race Face Turbine 2x10,new when fitted
Bottom Bracket: Race Face external BB,new when fitted
Pedals: Fatties Flatties,new when fitted
wheels, new when fitted
Skewers: Hope
Rims: DT Swiss EX500
Hubs: Hope Pro 2 Evo
Spokes: DT swiss
Tyres: continental travel contact, 26x1.75
Tubes:
Saddle: ProLogo with NACK carbon rails,new when fitted. the problem with this is, as you can see form the pics, it has a zip tie holding the the nose of the seat to the rails as the bit of plastic which holds it fell out, got glued back in and it's still there but didn't want to take any chances. will post some pics on monday
Seatpost: Ritchey WCS carbon,new when fitted
Seatpost Binder: unbranded
asking price is £1200 posted within uk, overseas extra at cost
regarding paypal fees, I will split them with the buyer
would be willing to split if I got 100% definite yes' on most parts, i.e frame, forks, wheels and cranks but buyer must pay the fees
