Kirk Revolution, retro frame, modern components!!

I've only just built this up but one of my "unicorn" bikes has come up for sale so I could do with clearing this out of the garage.

The frame is a Kirk Revolution magnesium alloy from around 1992, the paint has been polished and new decals made by gil_m. The frame is sound, no cracks.
Forks are 2003 Marzocchi MX Comp with the earlier decals.

Build thread here http://www.retrobike.co.uk/forum/viewtopic.php?f=6&t=239973&start=30
Price is £180 + shipping at cost. ono.





SPEC.

Frame: Kirk Revolution, die-cast magnesium alloy.

Fork: Marzocchi Bomber MX Comp 2003

Headset: Ritchey Ahead
Stem: FSA XC 150 Alloy
Handlebar: FSA XC270 Alloy Riser
Grips: Ebay lock-ons

Brake Levers: Avid Speed Dial 7
Brakes: Front: Clarks CMD8 mechanical disc/ Rear: Shimano XT V-brake
Brake Pads: Front: Clarks Organic disc pads/ Rear: Swisstop Green HP
Brake Cables: Clarks
Shifters: Shimano Deore M590 9 Speed
Front Derailleur: Shimano M510 LX (to be replaced with Shimano XT)
Rear Derailleur: Shimano Deore M590
Derailleur Cables: Shimano
Cassette: Shimano Deore HG50 9-speed
Chain: Sram
Cranks: FSA V-Drive
Chainrings: FSA 22-32-42
Chainring bolts: FSA
Bottom Bracket: FSA Megaexo
Pedals: Shimano SPD M

Hub Skewers: eBay specials
Rims: Mavic XM117
Hubs: Unknown
Nipples: Brass
Spokes: Straight guage stainless
Tyres: WTB Motoraptor 2.1
Tubes: Michelin

Saddle: Charge Spoon
Seatpost: Kalloy 27.0mm Alloy
Seatpost Binder: Unknown

Re: Kirk Revolution

Hi folks am a newbie so bare with me, my front mech on my bike is warn so am after a replacement mech but struggling to find one. Mines fixed by a single bolt to the mount on the frame, my components on my bike are gs 200. Please can any one help me, I am also looking to buy any other Kirk bikes ie precision, revolutions maybe. Thankyou for you to taking time in reading this hopefully hear from you soon. Regards Mick