32 hole 1st gen Hope bulb hub with the screw on spider for a 5 bolt disc, everything you see is included.
The rim is just a well used Mammoth, with a grind on the sidewall for trials use. Built with dt plain gauge spokes.
This is really about the hub, a blue original Bulb, with spider, lockring and 5 bolt disc rotor that is 185mm.
Bearings spin freely wthout any rattle, if anything they feel a touch dry & could use a grease, but smooth & sound.
Rotor is an old school Hope sport 185mm job.
I'm after around £30 posted