Few bits and pieces:
Sunn Crosss frame. Think it's from 20001/2.
Aluminium, IS disc mount and rim brake studs. 45cm/17.75" frame, 68mm bb. 22"c-c/22.75" effective top-tube. Takes a 27.2 post.
I also found the original Sunn stem and seat QR. There's also an integrated crud-catcher type thing for it somewhere too.
Plenty of scrapes, especially where the chain has come off on the BB shell, but it's all straight, no dents, and typical Sunn bombproof construction - check out the beefy welds and down-tube gusset.
Seen plenty of use, and has plenty of battle scars, but structurally good.
Would be good as a winter ride, or resprayed would buff up lovely
LX M600 v-brake F&R set, inc. pads and noodles.
1997 17" Voodoo Zobop URT full sus frame. Inc seat QR and Cane Creek headset.
17" c-t, 22" top tube, 100mm headtube, 68mm BB.
WI ENO eccentric hub. Rim brake only, threaded on each side for fixed/freewheel, 32h and laced to a destickered Mavic 317 (I think) rim.
Lovely piece of kit for easy conversion of vertical drop-out frames to single speed. This is a 130mm spacing hub, but I've used it in a 135mm frame with washers, or with a steel frame you'd just need to pull the stays in by 2.5mm each side. New ends for different spacing are available from WI though.
£90 posted for wheel, £75 for the hub.
Controltech Newton CNC stem, NOS - well fitted once and never even ridden! mid 90's downhill loveliness.
Too many bikes, not enough time!