Harryburgundy
Gold Trader
- Feedback
- View
Circa 2004/5 21" Specialized S-Works Frame
This frame is in very very nice condition but not immaculate.
The worst paint damage is to the drive side chain stay in the usual place and inside non-drive chain stay. There are some small chip here and there but overall the frame looks great, and in the right colour for an S-Works. Paintwork 'damage' where the front mech has been clamped.No dings or dents
The frame will accept both disc or V brakes although I do not have any studs if you were to build with V brakes
Dimensions
The seat-tube measures 21" from the centre of the bottom bracket to the top of the seat-tube
The seat-tube measures 18.5" from the centre of the bottom bracket to the centre of the top-tube
The top tube measures 24.5" centre to centre actual
The head-tube measures 5.5"
The bottom bracket shell is 68mm
The rear spacing is 135mm
Suspension corrected geometry to accept 80mm travel forks
Loads more pictures available...will include a black lip-lock Salsa seat-post clamp and an XT FM
£150 UK Posted GPP or £140 collected from Cardiff
Heaps more pictures available
Sunline XC One stem
Only a few months old and hardly used, as new
Black 1&1/8th 31.8 os clamp 80mm +/- 6 degrees ti hardware low stack height (34mm)
Top quality stem, up there with Thomson et al
£35 UK Posted GPP
Shimano Shadow M810 SS Rear Mech
Very low mileage, only a few months old and gentle use.
Bar a few very minor scratches at the rear and two very very small rub marks to the main body, pretty much indistinguishable from new
£60 UK Posted Gift PP
Shimano XTR M970 Chainrings
44-32-22 Low mileage 4 bolt 104bcd some flaking to the coating on the granny ring, very light chainring set
£60 UK Posted Gift PP
This frame is in very very nice condition but not immaculate.
The worst paint damage is to the drive side chain stay in the usual place and inside non-drive chain stay. There are some small chip here and there but overall the frame looks great, and in the right colour for an S-Works. Paintwork 'damage' where the front mech has been clamped.No dings or dents
The frame will accept both disc or V brakes although I do not have any studs if you were to build with V brakes
Dimensions
The seat-tube measures 21" from the centre of the bottom bracket to the top of the seat-tube
The seat-tube measures 18.5" from the centre of the bottom bracket to the centre of the top-tube
The top tube measures 24.5" centre to centre actual
The head-tube measures 5.5"
The bottom bracket shell is 68mm
The rear spacing is 135mm
Suspension corrected geometry to accept 80mm travel forks
Loads more pictures available...will include a black lip-lock Salsa seat-post clamp and an XT FM
£150 UK Posted GPP or £140 collected from Cardiff
Heaps more pictures available
Sunline XC One stem
Only a few months old and hardly used, as new
Black 1&1/8th 31.8 os clamp 80mm +/- 6 degrees ti hardware low stack height (34mm)
Top quality stem, up there with Thomson et al
£35 UK Posted GPP
Shimano Shadow M810 SS Rear Mech
Very low mileage, only a few months old and gentle use.
Bar a few very minor scratches at the rear and two very very small rub marks to the main body, pretty much indistinguishable from new
£60 UK Posted Gift PP
Shimano XTR M970 Chainrings
44-32-22 Low mileage 4 bolt 104bcd some flaking to the coating on the granny ring, very light chainring set
£60 UK Posted Gift PP
