New decals on and new price...
Geometry:
ST: 17.5"c-t
ETT: 23"
HT: 4.8" head tube
STA: 73*
HTA 71*
Made for 26" wheels and 80mm suspension fork. Could use 650b wheels also. (650b wheels on the pictures)
I removed the powdercoat (see pictures before in the readers bike section) Used Scotch Brite to "brush" the frame.
The frame is disc only with Paragon sliders, the sliders are a bit rough because they was used without the little plate Paragon now makes for the screws. I upgraded to this kit wich is much better and have the plate:
http://www.paragonmachineworks.com/cgi- ... key=MS0022
You can also get a dropout with gear hanger, so the frame could be used with gears also, if you also add some kind of cable holders.
Also the frame has a small ding in the downtube just near the BB, I can't really get a picture of it, but it is nothing really. Also some small marks on the seatstay.
Now £600 frame, Vicious cycles fork and King headset
Geometry:
ST: 17.5"c-t
ETT: 23"
HT: 4.8" head tube
STA: 73*
HTA 71*
Made for 26" wheels and 80mm suspension fork. Could use 650b wheels also. (650b wheels on the pictures)
I removed the powdercoat (see pictures before in the readers bike section) Used Scotch Brite to "brush" the frame.
The frame is disc only with Paragon sliders, the sliders are a bit rough because they was used without the little plate Paragon now makes for the screws. I upgraded to this kit wich is much better and have the plate:
http://www.paragonmachineworks.com/cgi- ... key=MS0022
You can also get a dropout with gear hanger, so the frame could be used with gears also, if you also add some kind of cable holders.
Also the frame has a small ding in the downtube just near the BB, I can't really get a picture of it, but it is nothing really. Also some small marks on the seatstay.
Now £600 frame, Vicious cycles fork and King headset
