Front and rear Hope mono mini brake set with carbon lever blades. Gunsmoke colour. I bought these but never got round to fitting them. They are in good condition with a few scrapes. A small amount of the anodizing has worn from changing gears (as you can see from the photos).
There are no frame mounting bolts but these can be picked up for a quid or two. The hose lengths are - rear 1350mm & front 730mm. Front is post mount, the rear IS. One of the carbon lever blades looks to have a hairline crack just where it pivots with the reservoir body (so faint it can't be picked up on a photo). However, it works absolutely as it should but I am including a new carbon blade which cost £24.99 from Chainreaction, so whoever buys them can replace the blade or sell it on.
They do have pads fitted but I would recommend putting some new ones on. Finally they will need good bleed.
£100 posted
Now sold to B3
There are no frame mounting bolts but these can be picked up for a quid or two. The hose lengths are - rear 1350mm & front 730mm. Front is post mount, the rear IS. One of the carbon lever blades looks to have a hairline crack just where it pivots with the reservoir body (so faint it can't be picked up on a photo). However, it works absolutely as it should but I am including a new carbon blade which cost £24.99 from Chainreaction, so whoever buys them can replace the blade or sell it on.
They do have pads fitted but I would recommend putting some new ones on. Finally they will need good bleed.
£100 posted
Now sold to B3
