holiday fund/moving home clearout

selling some bits to get some spending money for a holiday in a couple weeks and i'm moving into a flat in may, so need to clear out the spares.
heres a few items i no-longer need. Photos up tonite.


Alexrims dx32 26x30mm 36 spoke, disc/v brake wheels. Front has a diamond back q/r disc hub, runs sweet. Rear has been rebuilt onto a shimano center lock 9speed hub as the original ate its self. Both run true, slight bob in rear. Comes with a 160mm center lock rotor for rear and 160mm 6bolt for front. Also included is a set of avid juicy 3 hydralic brakes in ok condition, i've used them and they work, but the paint is bady scuffed. Theres a maxxis high roller on rear and a wtb mutano on front, both worn but worked fine on road for me.



£50 posted in uk

sold

1986 british eagle road bike frame 20.5" plus various parts. Exage 300 brakes, levers, shifters, front mech, biopace crank, wheels with tyres, bars, stem, post, etc....
Nearly a full bike, missing rear mech, chain, couple bolts, lock nut off forks.





£45 posted in uk

26" shimano deore xt parralax hubs in specialized z21 rims with silver spokes and light blue nipples. Has xt skewers in silver, 8speed road cassette.
Good free running wheels, wear on braking surfaces.





£40 posted in uk

SOLD

pace racing forks. Not sure on model, was told rc36.
Fair condition, but sold as spares repair
The air side holds air fine, the issues are with the spring side, i havent managed to get inside as the circlip holding the cap on is damaged. The bridges are made from 2mm aluminium plate, i made these as the forks came with 1 magnesium brace, which is damaged.
Lowers are in good nick, scuffs to the decals.

80-100mm travel, but not sure.







£25 posted in uk

1986 british eagle road bike frame plus various parts. Exage 300 brakes, levers, shifters, front mech, biopace crank, wheels with tyres, bars, stem, post, etc....
Nearly a full bike, missing rear mech, chain, couple bolts, lock nut off forks.

£50 posted in uk

Hi what size is the frame and do you have any pics? And Dibs on this please

photos up tonite, i'll measure it and let you know.

Ok thank you I will be out til about 10pm do you mind me having dibs until then ?

i dont mind at all.