Retrobike
http://www.retrobike.co.uk/forum/

Marzocchi NOS Spares, Job lot. Now £25
http://www.retrobike.co.uk/forum/viewtopic.php?f=39&t=190864

Author:  rumblytripod [ Wed Mar 07, 2012 12:21 pm ]
Post subject:  Marzocchi NOS Spares, Job lot. Now £25

Found these at the back of the Garage so will resurrect this thread. One job lot for everything. A few things sold previously as stated below.
£30 delivered. Now £25. SOLD
still see these popping up on ebay for £20-£30 each. Need to fund my recent fork purchase before the misses finds out.
Loads of Marzocchi spares available. All nos except the 888 springs. Not sure on exact fittings other than stated so I'll list the model and the part numbers for your researching pleasure.
Few more pics here http://s648.photobucket.com/albums/uu207/rumblytripod/
Right Spares first:
Prices dropped all round.
2002 Jr/Super T 150/170 piston rod - 8031133.
2003 DJ 110/130 - 8031152 piston rod. SOLD
Unknown piston rod - 850354 fatter than the others and all metal. possibly Monster T or Shiver (complete guess)
2003 Jr/Super T Plug unit top cap - 701228. 2 of these Just 1 left
R5089AB Slider protector tool for installing new seals. SOLD
Unknown 220mm X 30mm stanchion. £6
Image
Springs and travel kits next:
Going off the info on the pack the springs are universal across the range. So a 130mm spring should be suitable for any 130mm fork from that era but this might have changed as the model info on the packs on goes to 2002.

Pair of unknown orange 150mm X 20mm.
Pair of unknown orange 155mm X 23mm.
Pair of unknown red 175mm X 20mm.
2003 Jr/Super T Yellow 170mm. 514128 pring K=11,0. SOLD
2003 DJ 130mm Orange. 5141280 Spring K=6,0.
03/04 Z150. 2 differnt size springs, one blue one black but the pack is still sealed, presume it is intended. 850875 K=4,0.
888 Standard springs, been swapped with what came in the pack. Look mint.
130mm Progressive springs. 5141155. K=3,2 - 3,65. From the back of the pack suitable for 99/2000/2001 130mm forks.
03 DJ Travel extension kit 110mm-130mm 850347.
2000 Z1 CR-QR Travel Extension kit. 110mm-130mm.
Image
Ta

Author:  coomber [ Wed Mar 07, 2012 12:49 pm ]
Post subject: 

Whatleymeister was after some, I will pm him now

8)

Author:  rumblytripod [ Wed Mar 07, 2012 12:55 pm ]
Post subject: 

coomber wrote:
Whatleymeister was after some, I will pm him now

8)

Many thanks.

Author:  Whatleymeister [ Wed Mar 07, 2012 1:29 pm ]
Post subject: 

:shock: :shock: :shock: !!

Cheers coomber!

Right, The only items that might fit mine are the unknown red 175x20 (the orange ones are too soft, they are mediums, and the others are all far too long!!). Unless someone can tell me now what size spring a 98 Z3 light takes, then I would like to take dibs on these until I can quickly whip a spring out my fork and measure? Hopefully tonight, but more realistically tomorrow.

Hope thats ok!

Dan

Author:  rumblytripod [ Wed Mar 07, 2012 1:37 pm ]
Post subject: 

Whatleymeister wrote:
:shock: :shock: :shock: !!

Cheers coomber!

Right, The only items that might fit mine are the unknown red 175x20 (the orange ones are too soft, they are mediums, and the others are all far too long!!). Unless someone can tell me now what size spring a 98 Z3 light takes, then I would like to take dibs on these until I can quickly whip a spring out my fork and measure? Hopefully tonight, but more realistically tomorrow.

Hope thats ok!

Dan

According to the packs a 99 Z3 Light takes a 150 spring but there are no listings for a 175mm spring. I'll hold on to it while you check though no probs.
Theres always the boy racer trick of cutting them down. Not progressevie so will be ok if youve got a vice, angle grinder and steady hand :roll:
Cheers
Chris

Author:  Whatleymeister [ Wed Mar 07, 2012 2:02 pm ]
Post subject: 

rumblytripod wrote:
According to the packs a 99 Z3 Light takes a 150 spring but there are no listings for a 175mm spring. I'll hold on to it while you check though no probs.
Theres always the boy racer trick of cutting them down. Not progressevie so will be ok if youve got a vice, angle grinder and steady hand :roll:
Cheers
Chris


I do have access to a vice and a friend who has an angle grinder. I could always go down that route before I crack open the first bottle of ale... :lol:

Just called Winwave (they changed my steerer and couldnt have been more helpful) but the guys knowldge of the older forks was poor at best. Looks like I will have to whip them out ( :shock: ) later and measure.

Cheers mate

Author:  rumblytripod [ Thu Mar 08, 2012 10:22 am ]
Post subject: 

Morning price drop bump.

Author:  drystonepaul [ Thu Mar 08, 2012 12:41 pm ]
Post subject: 

R5089AB Slider protector tool for installing new seals. £5

Hello, can I take this please?
Sending PM.

Author:  rumblytripod [ Fri Mar 09, 2012 11:38 am ]
Post subject: 

pre ebay price drop bump

Author:  rumblytripod [ Tue Jul 23, 2013 7:00 pm ]
Post subject:  Re: Marzocchi NOS Spares, Job lot resurrection.

back from the dead.

Author:  FluffyChicken [ Tue Jul 23, 2013 7:25 pm ]
Post subject:  Re: Marzocchi NOS Spares, Job lot resurrection.

So is it £30 for everything that is not sold ?

Author:  rumblytripod [ Tue Jul 23, 2013 7:42 pm ]
Post subject:  Re: Marzocchi NOS Spares, Job lot resurrection.

FluffyChicken wrote:
So is it £30 for everything that is not sold ?

Thats right, couldnt be bothered taking new pics. So its everything pictured minus one of the top caps, piston rods a pack of springs and the slider tool.
Cheers
Chris

Author:  rumblytripod [ Thu Jul 25, 2013 9:38 am ]
Post subject:  Re: Marzocchi NOS Spares, Job lot. Now £25

Reduced, someone must want to take these off my hands.

Author:  rumblytripod [ Sat Jul 27, 2013 9:35 am ]
Post subject:  Re: Marzocchi NOS Spares, Job lot. Now £25

If you twist my arm I might take less type bumpy.

Author:  smee [ Wed Jul 31, 2013 12:27 am ]
Post subject:  Re: Marzocchi NOS Spares, Job lot. Now £25

£20 posted? PM on the way...

Author:  bhill22 [ Wed Jul 31, 2013 7:18 am ]
Post subject:  Re: Marzocchi NOS Spares, Job lot. Now £25

Pm on way

Author:  rumblytripod [ Wed Jul 31, 2013 9:36 am ]
Post subject:  Re: Marzocchi NOS Spares, Job lot. Now £25

Sorry these are now sold. Will update.

All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/