Few more bits left in the garage. Stuff reduced.

keitht

Senior Retro Guru
Feedback
View
Just a few left over bits and bobs...some new in packets, some not ..all in good condition unless stated.

bikestuff2011_0406_100356.jpg


bikestuff2011_0406_100402.jpg


bikestuff2011_0406_100407.jpg


bikestuff2011_0406_100412.jpg


bikestuff2011_0406_100427.jpg


bikestuff2011_0406_100432.jpg


bikestuff2011_0406_100439.jpg


bikestuff2011_0406_100455.jpg


bikestuff2011_0406_100507.jpg


bikestuff2011_0406_100519.jpg


bikestuff2011_0406_100523.jpg


bikestuff2011_0406_100534.jpg


bikestuff2011_0322_142720.jpg



3TT Downhill bars and 24/7 stem £20
Ultegra 6500 cranks..rings usable but have wear £17 SOLD
Middleburn ring £15
Hite-rite copy £10
Marzocchi MX brake adaptors £15
500 Exage brake levers £20
Jumbo Orange chainstay protector £5
Crud catcher £12
Chain tension thingy £10
525 spd..tatty but sound £12
DMR v8s as above £12
Marzocchi Junior/super T springs £15
Thomson 27.2 330mm seatpost £40
Manitou S-type SRL 165 x 38 in gC but needs service £40 SOLD
XTR f.mech 31.8
XTR f.mech 31.8 £20ea
Dura-ace HG narrow minimal miles £20
Sram X-9 rear mech £20
2 x Aztec v pads for ceramic rims £5 SOLD
2 x Fibrax as above £5 SOLD
FSA Xc 170 risers £20
Fox vanilla 165 x 39 700lb spring £20

Voodoo D-jab frame in VGC size 18"

bikestuff2011_0406_100906.jpg

bikestuff2011_0406_100914.jpg

bikestuff2011_0406_100924.jpg

bikestuff2011_0406_100941.jpg


£500 now £465
 
Not really...

Only thing I could possible think of is some Pikes or similar for the P7.

Need to be black and 120-140mm, 190+ steerer and QR.

Oh and some lock-on grips....or..and this is a longshot...a brake master cylinder for my E21 323i....

K
 
I'm up for both sets of the v brake inserts, and the red tensioning thingy, do you have a better pic of it?

Thanks

Ian
 
Back
Top