first up
just a load of bits i've found, that i dont need
pair of hope qr's black £12 posted
used spd's vp? £8 posted
hayes mx4 mechanical caliper and front? cable £8 posted
hope bulb 20 down to qr adapter £13 posted
old kona stem..from a 96/7 lavadome? £5 poosted
new deore v brake levers pair of £10 posted
DMR IS SOLD
DMR Exalt rolling chassis
2007 16" frame
07 drop offs 150mm travel 20mm axle
canecreek headset
easton post 26.8mm
easton stem 60mm and 31.8mm clamp
raceface evolve bars 31.8mm clamp
hope seatclamp
hayes soles brakes f+r (NEED BLEEDING)
160mm rotors
shimano 8 spd shifter
spesh front and shimano rear hubs laced (badly...not me) to sun singletrack rims(the front hub needs 2 seals to make perfect as there is a little wobble from the 20mm kit ..will try and sort this)
used dmr moto digger tyres..good enough to get you going for a while yet
truvativ cranks with standard pedals..165mm length arms....need isis bb and new 32t ring to complete for fitting to bike....I have brand new 22+42 rings ready to chuck in
DMR seat
sram x7 front shifter
deore long cage rear mech
To finish..it will need
a 8spd chain and cassette to match the shifter
front mech
grips
brakes bleeding
gear cables
the front hub 20mm axle kit needs rubber o-rings or something to stop any wobble...it cant be sorted by doing up tight.
£200 posted
based in kettering for collection/meet ups etc
cheers
just a load of bits i've found, that i dont need
pair of hope qr's black £12 posted
used spd's vp? £8 posted
hayes mx4 mechanical caliper and front? cable £8 posted
hope bulb 20 down to qr adapter £13 posted
old kona stem..from a 96/7 lavadome? £5 poosted
new deore v brake levers pair of £10 posted
DMR IS SOLD
DMR Exalt rolling chassis
2007 16" frame
07 drop offs 150mm travel 20mm axle
canecreek headset
easton post 26.8mm
easton stem 60mm and 31.8mm clamp
raceface evolve bars 31.8mm clamp
hope seatclamp
hayes soles brakes f+r (NEED BLEEDING)
160mm rotors
shimano 8 spd shifter
spesh front and shimano rear hubs laced (badly...not me) to sun singletrack rims(the front hub needs 2 seals to make perfect as there is a little wobble from the 20mm kit ..will try and sort this)
used dmr moto digger tyres..good enough to get you going for a while yet
truvativ cranks with standard pedals..165mm length arms....need isis bb and new 32t ring to complete for fitting to bike....I have brand new 22+42 rings ready to chuck in
DMR seat
sram x7 front shifter
deore long cage rear mech
To finish..it will need
a 8spd chain and cassette to match the shifter
front mech
grips
brakes bleeding
gear cables
the front hub 20mm axle kit needs rubber o-rings or something to stop any wobble...it cant be sorted by doing up tight.
£200 posted
based in kettering for collection/meet ups etc
cheers
