http://www.ebay.co.uk/itm/Carlton-Flyer ... Swa-dWiWCG
Frame number C10464, made approximately 1950
Seat tube centre to top 21” or 53cm
Seat tube centre to centre 20 ¼” or 51.5cm
Top tube centre to centre 21 ¾” or 55cm
Rear axle spacing 4 ½” or 115mm
1” Threaded forks, with the fork column measuring 6 ¼” or 16cm from the top of the forks where the bearings sit to the top of the threaded column.
No headset with the frame.
Started out as a restoration project but didn’t get finished.
Resprayed at Dave Marsh’s in Dinnington, South Yorkshire last year but never built up.
Frame number C10464, made approximately 1950
Seat tube centre to top 21” or 53cm
Seat tube centre to centre 20 ¼” or 51.5cm
Top tube centre to centre 21 ¾” or 55cm
Rear axle spacing 4 ½” or 115mm
1” Threaded forks, with the fork column measuring 6 ¼” or 16cm from the top of the forks where the bearings sit to the top of the threaded column.
No headset with the frame.
Started out as a restoration project but didn’t get finished.
Resprayed at Dave Marsh’s in Dinnington, South Yorkshire last year but never built up.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.