Elastomers: Pics here to make it easy

Enid_Puceflange · Jul 22, 2009

Ok,

Upon stripping down the rear end of the Balance 450 i just bought,

I was right to suspect that the rear end is seized sold, halfway through tidying it up , but the elastomers look like they are way WAY past their best

Does anyone have any or know where i could get some??

Then i will need to get round to doing the Manitou mach 5's next

Cheers

Gary C :roll:

development_cycle · Jul 22, 2009

That arrangement looks very similar to the early Judy forks, you will need to let us know the dimensions of the elastomers to know for sure if you can use others.

Enid_Puceflange · Jul 22, 2009

They look like they are

30mm x 18mm

or 1 & 3/4 " x 5/8" ths (just over)

Cheers

Gary C

cce · Jul 22, 2009

from memory (and this is a LONG time ago) they dont look massively dissimilar to my old Mach 5 elastomers

if you can get the mach 5 elastomers out it might be worth a look?

Enid_Puceflange · Jul 22, 2009

cce":105qnoxb said:
from memory (and this is a LONG time ago) they dont look massively dissimilar to my old Mach 5 elastomers

if you can get the mach 5 elastomers out it might be worth a look?

Thats the job for later tonight (possibly with a beer

)

Any idea where will sell such Elastomers :?:

Gc

Splatter Paint · Jul 22, 2009

http://www.suspensionforkparts.net/shop ... category=7

cce · Jul 22, 2009

enid_puceflange":19z95wh2 said:
cce":19z95wh2 said:

from memory (and this is a LONG time ago) they dont look massively dissimilar to my old Mach 5 elastomers

if you can get the mach 5 elastomers out it might be worth a look?

Click to expand...

Thats the job for later tonight (possibly with a beer )

Any idea where will sell such Elastomers :?:

Gc

i had some mach 5's back in 98 and the adjusters were well and truly stuck then. good luck sir!

Enid_Puceflange · Jul 22, 2009

Not even attempted to look at the forks yet!
The mess in the rear shocks has put the fear of god into me! :shock:

Gc

Elastomers: Pics here to make it easy

Enid_Puceflange

development_cycle

Enid_Puceflange

cce

Enid_Puceflange

Splatter Paint

cce

Enid_Puceflange

Similar threads

Latest posts