Roox ahead stem 1"
- Thread starter renaldo
- Start date
Not sure I've ever seen one in 1 inch.
I've just used a shim to get around this issue on an old clockwork, so able to run a 1 1/8 ahead stem rather than the limited options in 1 inch.
I do have a new/boxed roox 1 1/8 stem and matching bar ends, in a kind of painted silver/grey rather than bare metal. If you go down the route of shimming the steerer and think these might tick boxes, let me know and I'll dig them out and take some pics for you.
I've just used a shim to get around this issue on an old clockwork, so able to run a 1 1/8 ahead stem rather than the limited options in 1 inch.
I do have a new/boxed roox 1 1/8 stem and matching bar ends, in a kind of painted silver/grey rather than bare metal. If you go down the route of shimming the steerer and think these might tick boxes, let me know and I'll dig them out and take some pics for you.
Re:
Thanks ishaw, would definitely be interested in some photos please.
I have tried a shim before with limited success - it was hard to get everythnig tight enough to stop the stem clamp slipping on the shim, or the shim on the steerer. Maybe roughing the surfaces a little would help?
Thanks ishaw, would definitely be interested in some photos please.
I have tried a shim before with limited success - it was hard to get everythnig tight enough to stop the stem clamp slipping on the shim, or the shim on the steerer. Maybe roughing the surfaces a little would help?
SriKrsnadread
Dirt Disciple
Re:
Still looking for a 1 inch roox stem? I have a nos 1 inch in 110 mm with about 15 degrees lower rise. 1 spot from storage at bottem. But depending on how you install it you see it
Still looking for a 1 inch roox stem? I have a nos 1 inch in 110 mm with about 15 degrees lower rise. 1 spot from storage at bottem. But depending on how you install it you see it
