Wanted! Again! 1" threaded steerer

Jez,

Forgive me because I did not keep up on what you were previously looking for...

do you need just a 1.0" threaded steerer in a specific length or is there a particular fork with steerer you are looking for?

If it's just the steerer, let me know...I can source what ever length you require.

cheers,

rody
 
Aha! Rody my life saver.

Yes I am indeed after a 1" threaded steerer. Length (including the hidden bit in the fork crown) needed is 200mm in total. Needs to be threaded too so I imagine a good 2 " of thread needed.

My current steerers are literally mm too short :(
Let me know how much Rody!
 
Jez,

Is this to go in the suspenders? If so, I'll measure mine for the crown length and diameter.

Just to confirm...what is the length of your headtube and the stack height of your headset?

rody
 
Yes it sure is Rody.

I need 210mm of steerer in totallity (thats measured from the bottom of the steerer itself to the very top. Again - I need about 2 inches of thread. Still not sure about headset stack height as Im dabbling with changing the XT one I have for a Chris King.
 
Back
Top