Raceface turbine granny spacers and bolts needed
- Thread starter trek_y
- Start date
I had this problem and looked everywhere, had no luck from RF. in the end I made some of my own from ally pipe cut into 8mm pieces. but I also found some at my LBS
give dennis a ring, I think I had his last set so he might have to order some.
http://www.cyclefix.co.uk/
give dennis a ring, I think I had his last set so he might have to order some.
http://www.cyclefix.co.uk/
8mm you say ? Thats exactly the length of the collar of standard double chainring bolts I have so have tried those for size as spacers with some long(ish) bolts and it all seems to have gone together well enough. The bolts are only in about 5mm into the thread on the cranks so will get some longer ones before using it in anger.
I picked these bolt's up from CRC and they do the job nicely
http://www.chainreactioncycles.com/Mode ... elID=35865
16mm and made of steel, exactly what ya need
http://www.chainreactioncycles.com/Mode ... elID=35865
16mm and made of steel, exactly what ya need
Similar threads
