Anyone have Manitou 4 fork spares at all?

LeeDevelopment · Apr 14, 2013

I'm looking for some bits and pieces.

2 x canti brake post studs, part number 040442

1 x STG clip, part number 040634

2 x compression rod screws, part number 040644

4 x arch screws, part number 040452

1 x aluminium skewer, part number 040625

One of the adjuster assembly caps, or more specifically the adjuster cap with the two pieces of metal rods in it and the cap o-ring with the two small holes in it, part number 040872

2 x retaining rings, part number 040640

2 x dust seals, part number 040166

1 x upper bushing, part number 040155

ishaw · Apr 14, 2013

Pretty much everything but the fork itself then

I used to have a lot of spares as I rebuilt a few sets but strange never ended up using riding any. I don't think I've got anything left but I do have a skewer rod from a set if manitou forks, but its not from a 3 or 4. You can have this (inc adjuster) if it might help as its no use to me.

LeeDevelopment · Apr 14, 2013

That would be absolutely lovely, thank you, can you PM me?

Antstark · Apr 15, 2013

I would have to agree that you may be better off looking for a complete new fork.

The compression rod screws ...are they the ones that go in the bottom of the fork....if so then they are just tapered allan bolts. I probably have some in marine grade stainless steel you can have if you want.

Dust seals you can get from suspension fork parts (http://www.suspensionforkparts.net) and they are also going to start doing the upper and lower bushings soon too. They said early May last time i spoke to them.

LeeDevelopment":36eclyy3 said:
I'm looking for some bits and pieces.

2 x canti brake post studs, part number 040442

1 x STG clip, part number 040634

2 x compression rod screws, part number 040644

4 x arch screws, part number 040452

1 x aluminium skewer, part number 040625

One of the adjuster assembly caps, or more specifically the adjuster cap with the two pieces of metal rods in it and the cap o-ring with the two small holes in it, part number 040872

2 x retaining rings, part number 040640

2 x dust seals, part number 040166

1 x upper bushing, part number 040155

Anyone have Manitou 4 fork spares at all?

LeeDevelopment

Old School Grand Master

ishaw

LeeDevelopment

Old School Grand Master

Antstark

Similar threads

Latest posts