I would have to agree that you may be better off looking for a complete new fork.
The compression rod screws ...are they the ones that go in the bottom of the fork....if so then they are just tapered allan bolts. I probably have some in marine grade stainless steel you can have if you want.
Dust seals you can get from suspension fork parts (http://www.suspensionforkparts.net
) and they are also going to start doing the upper and lower bushings soon too. They said early May last time i spoke to them.
I'm looking for some bits and pieces.
2 x canti brake post studs, part number 040442
1 x STG clip, part number 040634
2 x compression rod screws, part number 040644
4 x arch screws, part number 040452
1 x aluminium skewer, part number 040625
One of the adjuster assembly caps, or more specifically the adjuster cap with the two pieces of metal rods in it and the cap o-ring with the two small holes in it, part number 040872
2 x retaining rings, part number 040640
2 x dust seals, part number 040166
1 x upper bushing, part number 040155