WANTED NOLEEN NR4 REAR SHOCK

royboy2cv

GT Fan
Hi all ,justed started a new projecet , a Proflex the only problem is no rear shock ,so has any one got or know of a Noleen NR4 shock for sale ? thanks for any help , i think i need it .
 
im having the same problem with mine but might be doing some adapters takeing the drawings to my local firm this week.the adapter will then let you fit a fox shock give us a shout if its something you might be intereseted in :cool:
 
many thanks for the offer of that ,but i am going to try fit the Noleen shock ,if i can find one (dead or alive ,do you know of one ?) and do the rear swinging arm mod ,to get rid of the sticktion from the plastic bushes ,mine is a 856 frame (or a XPX) so it is not the same as the mod on the forum and i will try to use needle roller bearings and will not have to ream out the swinging arm ,i will start in the morning making the parts ,help ,thanks again for the offer ,intereseted in my mod ? if it works i will do some pics .if it does not work i will not say another word.
 
royboy2cv":2u5obqlf said:
many thanks for the offer of that ,but i am going to try fit the Noleen shock ,if i can find one (dead or alive ,do you know of one ?) and do the rear swinging arm mod ,to get rid of the sticktion from the plastic bushes ,mine is a 856 frame (or a XPX) so it is not the same as the mod on the forum and i will try to use needle roller bearings and will not have to ream out the swinging arm ,i will start in the morning making the parts ,help ,thanks again for the offer ,intereseted in my mod ? if it works i will do some pics .if it does not work i will not say another word.

will keep my eyes on this :)
 
ozone1":3neel2lq said:
ive got a spare noleen of a gt rts ...same as that?

dont think they have the same mount on rts ones bloody proflex made it a choice that you can fit any shock aslong as its a proflex one :facepalm: hence why people have gone the adapter route. might be able to change the push rod not sure :roll:
 
I have a couple of NR-3's with compression rod end-mounts made for ~'95 KHS duallies that can be used as long as you have the Proflex rod end-mounts (or can fabricate one). I've done this myself so I know it works. They have 450lb springs. $A40 + shipping each.

A40258D5-8265-4FEF-B3E4-66D4716868BE-32985-0000070B11F5A909_zps4954ec6d.jpg


061CA959-238B-4B29-B57F-0BDA4B1CA56A-32985-0000070B24FE9EC6_zps7a2ba586.jpg


50333E3F-F910-4C1B-B696-DD19B4A8390D-32985-0000070B29D7EAD5_zps14846831.jpg
 
Back
Top