Need old proflex parts, specifically either the MCU elastomers that came with the 756, or any shock that will retrofit the rear suspension or vector 2 fork...
ProFlex Parts - Anything
- Thread starter ridevintagemtb
- Start date
breezerboy
Retro Guru
cvi
I've heard that CVi may have some, depending upon year. No guarantee, but give them a call on 01405 760030.
I've heard that CVi may have some, depending upon year. No guarantee, but give them a call on 01405 760030.
SLIM
BoTM Winner
CVI is dead !!!
closed its doors recently
do have a supplier , for the elastomers not the original yellow ones but modern type , more UV resistant so will last a lot longer
not sure on the replacement shock have to check for you
RAPID DESCENT INNOVATIONS do a spring upgrade for the girvin forks , so will be good for your VECTOR II
ps , dont bother with the boiling / microwaveing solution they will be rock hard again in about a week !!
let me know
closed its doors recently
do have a supplier , for the elastomers not the original yellow ones but modern type , more UV resistant so will last a lot longer
not sure on the replacement shock have to check for you
RAPID DESCENT INNOVATIONS do a spring upgrade for the girvin forks , so will be good for your VECTOR II
ps , dont bother with the boiling / microwaveing solution they will be rock hard again in about a week !!
let me know
SLIM
BoTM Winner
you definately WONT get a replacement rear shock
( wasn`t sure on the frame shape )
same shape as my 555 , basically
if your interested in MCU`s ( elastomers ) i can get some for about £40.00 for 500mm
gaff has a mate who is wanting some , so we can do a share
more than enough each for 1 frame
link for RDI = http://www.rapiddescentscotland.co.uk/
( wasn`t sure on the frame shape )
same shape as my 555 , basically
if your interested in MCU`s ( elastomers ) i can get some for about £40.00 for 500mm
gaff has a mate who is wanting some , so we can do a share
more than enough each for 1 frame
link for RDI = http://www.rapiddescentscotland.co.uk/
ameybrook":gm6oae2d said:
I think Risse will have the parts you need. The 756 is listed, but alas the 555 is not.
http://www.risseracing.com/proflex.shtml
In fact Risse make alot of shocks to fit many retro models.
http://www.risseracing.com/applications.shtml
ti_pin_man
Senior Retro Guru
- Feedback
- View
Risse shock
I bought a Risse Terminator shock on the promise it would fit my Amp... it bl00dy didn't so is sitting in my part box. I think the only other thing it might fit is a proflex or something as it has no eye one end and slots into a frame. pm me if your interested in pics.
I bought a Risse Terminator shock on the promise it would fit my Amp... it bl00dy didn't so is sitting in my part box. I think the only other thing it might fit is a proflex or something as it has no eye one end and slots into a frame. pm me if your interested in pics.
Similar threads
