Very thin cassette spacer...

jez-4-bikes-max

Kona Fan
Feedback
View
Goldtec cassette rattles about a bit. Need a super thin (1mm I reckon) spacer to pop at the end of the cassette to let the thingie bind down and make it tight.

Anyone help?
 
one came on my XT 737 cassette held in place by a plastic collar - I need it but some one else might have a spare?
 
another solution would be to use a few of those razor blade like washers that come under the lock ring, instead of having one use 3 or something?
 
very thin spacer.

a 1mm bottom bracket spacer works a treat, had same problem put on hub before cassette and solved problem.
 
I have a couple which I could send you, but to tell the truth I have always ran a homemade gear set up/cassette of 1x5 - and when I need one of these spacers I just go to any bike shop with a mechanic and ask for one, they usually have a box or two of spacers hanging around and often will give you one or two for free.
 
Here you go, I dug out two both around 1mm thick, they are yours if you want.

spacerbj5.jpg
 
Back
Top