Rigid 1 1/8" forks Spinner, Accutrax, Tange, etc SORTED

Stick Legs

Gold Trader
Feedback
View
SORTEDHi,
I need some rigid forks for my Dyna Tech Quantum.
They need to be threaded and 200mm steerer.

I would Ideally like some Tange BigForks which are like Project 2's with a curve.
Ideally also Black.

Not keen on P2's as they make the rake look too long to my eye, better with either an offset drop out or a curve.

What have you?

Would be interested in RC-30's as well in the right condition.

Thanks.
 
Re:

Ive got a set of tange or is it Tioga big forks though will need to check the steerer length and diameter. Ive also got a set of triple butted forks that came with a dynatech torus i have but ive got rc31s fitted. Also have some very nice rc30s.

If any are of interest let me kniw and I'll dig out and neasure up and grab some pics for you.
 
Re: Rigid 1 1/8" forks Spinner, Accutrax, Tange, etc etc.

All of the above! LOL

I'd love RC-30's for it.
Can you PM me a price & a picture because at least then I can change the steerer.
A pic of the Torus forks as well please is they are 200mm steerer and if not threaded thick enough to be cut down.

Cheers.
 
Re: Re:

ishaw":196puvkk said:
Ive got a set of tange or is it Tioga big forks though will need to check the steerer length and diameter. Ive also got a set of triple butted forks that came with a dynatech torus i have but ive got rc31s fitted. Also have some very nice rc30s.

If any are of interest let me kniw and I'll dig out and neasure up and grab some pics for you.

It they are Tioga forks and Stick Legs don't want them- I'd be interested. I fancy doing a build with Tioga kit.

Oh, and I've got a pair of GT Bologna forks to throw into the mix in finest purple. :D
 
Re: Re:

cherrybomb":2gvxjjqg said:
ishaw":2gvxjjqg said:
Ive got a set of tange or is it Tioga big forks though will need to check the steerer length and diameter. Ive also got a set of triple butted forks that came with a dynatech torus i have but ive got rc31s fitted. Also have some very nice rc30s.

If any are of interest let me kniw and I'll dig out and neasure up and grab some pics for you.

It they are Tioga forks and Stick Legs don't want them- I'd be interested. I fancy doing a build with Tioga kit.

Oh, and I've got a pair of GT Bologna forks to throw into the mix in finest purple. :D
They are Tioga forks but are 1 inch threaded not 1 1/8 as the OP wanted. They are surplus really, bought for the Yp Eddy I had that was way too small, but I found some segmented ti forks that were similar to the originals. Sold with the frame though.
 
Re:

Here are a few pics of the forks I have that might fit the bill.

I'm not 100% sure on parting with the Raleigh forks (spinner on the drop outs) as I may be selling the frame they belong to and whilst it may sound sad, it seems a shame to split them.

As mentioned above, the tioga forks I have are 1 inch threaded not 1 1/8 I'm afraid.

The Tange forks are 200mm threaded. The Raleigh ones are 205mm ahead.

I've not got a threaded steerer for the RC30's which are in great condition. A few chips to the chrome and some tiny surface rust spots here and there, but they are about the tidiest I have seen for a long time (and they have been sat in a nice box in my garage for some time too). Bolts on the crown are new from pace, I think the port plugs on the lower legs were also new from pace as well (forgot to check that and they are now tucked back in their padded box). I will more than likely have a crown race shim in 1 1/8 and I think I may also have a spare set of leg decals (nothing wrong with the ones on there, the previous owner has covered them in heli tape or similar, but this has started to yellow a bit).
 

Attachments

  • 20161205_162544.jpg
    20161205_162544.jpg
    64.1 KB · Views: 459
  • 20161205_162525.jpg
    20161205_162525.jpg
    70.8 KB · Views: 459
  • 20161205_162516.jpg
    20161205_162516.jpg
    62.4 KB · Views: 459
  • 20161205_162502.jpg
    20161205_162502.jpg
    61.1 KB · Views: 459
  • 20161205_162314.jpg
    20161205_162314.jpg
    46.7 KB · Views: 459
  • 20161205_162232.jpg
    20161205_162232.jpg
    58 KB · Views: 459
  • 20161205_162131.jpg
    20161205_162131.jpg
    71.1 KB · Views: 459
Back
Top