Raleigh Flyer singlespeed / fixed

Dead Rats

Gold Trader
Feedback
View
Hope you all had a good Bank Holiday? I spent it zooming around South Manchester and Cheshire, test riding my 'new' singlespeed :) Bit of a hot rod, but just a lowly 18-23 frame (which came to me as a free F&F) so more suited to a retromod than a resto IMO. Running approx 70" gear on the free side at present, I don't really do fixed (not since knee op) but it's nice to have the option I guess. Was going for matching dual pivots F&R but the rear wheel needed more drop so I polished up a puny Weinmann sidepull from the spares box and treated it to some new fittings... at least the pads match anyway. I have some wider Syntace ergo drops to try out and straight up black bar tape to fit afterwards - should drop 250g or so and get it to 23lb which was my target. The pedals just do the job, the radial front wheel was a spare I had (OE on my Dad's Giant SCR) so I found a new rear that was the nearest match to it in flip-flop 120mm OLD. Front brake caliper, levers and hubs have been de-logo'd with very fine wire wool and rims have both been de-stickered... It rides nice, and I put a good few hours in on it yesterday!

10245549_10152484157806171_7561212307801162857_n.jpg


1601203_10152484157646171_4003663397379645441_n.jpg


10405407_10152484157926171_3785780029083284822_n.jpg


10420785_10152484157436171_1090565697389959341_n.jpg


1920199_10152484157486171_6415339861914823035_n.jpg


10247280_10152484157901171_6367852462074517433_n.jpg


10320617_10152484157936171_7723262513892124611_n.jpg


10262213_10152484157761171_7814086585347382595_n.jpg


SPEC:
Frame & Fork: late 1980s 59cm Raleigh 18-23 tubing (powdercoated RAL 5015)
Headset: vintage chromed YST 1″ threaded
Stem: vintage SR Custom (powdercoated black)
Handlebar: unknown vintage steel drops (powdercoated to match frame)
Bar Tape: Cinelli LTD edition
Brake Levers: Tektro RL 340 (new)
Front Brake: Promax dual pivot (new)
Rear Brake: vintage Weinmann 500
Brake Pads: Promax cartridges with Superstar pads (new)
Brake Cables: Shimano M:System (new)
Freewheel: DNP 16 tooth
Chain: KMC gold 1/8″ (new)
Cranks: Truvativ Elita 175mm (new)
Chainring: Stronglight 42 tooth (new)
Bottom Bracket: Truvativ GXP (new)
Pedals: Wellgo with toe clips & straps
Front Rim: Alex Rims DA22
Rear Rim: Weinmann (new)
Front Hub: Formula QR with vintage Sachs skewer
Rear Hub: Quando solid flip-flop with track nuts and 16t fixed cog (new)
Spokes: Stainless steel (new on rear)
Tyres: IRC Road Tour 700 x 28c (NOS)
Saddle: Charge Spoon (new)
Seatpost: Kalloy (new)
Seatpost Binder: chromed bolt-up (new)
Bottle Cage: unknown
Weight: 23.5lb

MORE PICS:


Frame & bits after sandblasting:

10174930_10152405451971171_2940736131960808928_n.jpg


Frame after powdercoating by Sprayquick:

10311743_10152439310686171_7422359249851522456_n.jpg


1557700_10152439311056171_3751904818326075315_n.jpg


10267766_10152439311061171_6850606857130942969_n.jpg
 
Thanks! I tried to get it looking nice in a less is more kinda way *

* have since added Continental yellow valve caps to match the water bottle lid :oops: :D
 
Back
Top