1975 Peugeot PR10 - project update. Thavenet Theme

toomski

Retro Guru
Well I have finished the Peugeot PR10 off.

The bike was burgundy red but had it blasted, now has a bit of a 'Thavenet' theme, well nod to - going on, silver with a few gold accents.

The original forks were crude, I had a nicer set around that fitted which was lucky.

Had to change a few bits to get it where I wanted.
Velo orange french threaded sealed bottom bracket was a good spend.

Used most of a velo orange headset aswell, but had to use a different locking nut.

Cinelli 66-42 bars
Campag shifters replaced the simplex criterium which were mank.
I went for a 3ttt saddle, could not find a reasonably priced ideale 2001 but this fits the bill exactly. I have also reconditioned the original Ideale saddle and keep swapping it over can't make up my mind which looks better.
Stronglight 49D crank cleaned up well....
Rear deraillieur is a gipiemme badged Simplex super LJ...works lovely.

Lovely little bike. Turns in fast, enjoyable to ride....already came off though, slipping on wet leaves ha! ha! numpty.Funny how you get connected to these damn bikes

PEUGEOT PR10 - Makeover

Frame: Reynolds 531 - 21"

Fork: Reynolds 531 (replaced the originals)

Headset: Velo Orange
Stem: Unknown
Handlebar: Cinelli 66- 42
Bar Tape: Pro Digital-Carbon (White)

Brake Levers/Brifters: Mafac Competition drilled anodised gold
Brake Calipers: Mafac Racer centrepull with some bits of Mafac 2000
Brake Pads: Generic
Brake Cables: Shimano Dura Ace

Shifters: Campagnolo Record
Front Derailleur: Simplex Criterium
Rear Derailleur: Simplex Super LJ badged Gipiemme
Derailleur Cables: Shimano Dura Ace
Cassette: Suntour Winner 13-23
Chain: KMC 9 speed SL
Cranks: Stronglight 49D
Chainrings: Stronglight 52-42
Bottom Bracket: Velo Orange Gran Cru sealed French Thread
Pedals: Spidel Quill pedals - black cages

Rims: Ascenti
Hubs: Miche sealed
Hub Skewers: Miche
Nipples:
Spokes:
Tyres: Veloflex 20mm
Tubes: Continental - light ones

Saddle: 3ttt SL
Seatpost: San Marco micro adjust - no fluting
Seatpost Binder: n/a

Bottle Cage: None
Extras:

Weight: haven't weighed but reckon 22lbs approx.

Get some well received comments from people, seemed have definitely tapped a nostalgia vein with this bike!!

See what you think for yourselves.

Toomski
 

Attachments

  • PR 10 before.jpg
    PR 10 before.jpg
    81.5 KB · Views: 10,694
  • 1 Side.JPG
    1 Side.JPG
    67.4 KB · Views: 10,694
  • 3 Rear view.JPG
    3 Rear view.JPG
    62.9 KB · Views: 10,693
  • 2 Side View.JPG
    2 Side View.JPG
    72 KB · Views: 10,693
PR 10 - More Photos

Thought I would put a few more photos up.

It is one of those bikes that looks even better in the metal.
There is a charm about it that I can't quite put my finger on, but then I am biased.

I think it bridges the gap between PR 10 and a PX10....... maybe a PRX 10 ha! ha!
 

Attachments

  • 5 Mafac Competition Lever.JPG
    5 Mafac Competition Lever.JPG
    36.2 KB · Views: 10,691
  • 6 Peugeot Head Badge.JPG
    6 Peugeot Head Badge.JPG
    41.3 KB · Views: 10,691
  • 10 Gipiemme. Simplex Super LJ.JPG
    10 Gipiemme. Simplex Super LJ.JPG
    57.8 KB · Views: 10,691
  • 9 Stronglight 49D.JPG
    9 Stronglight 49D.JPG
    61.3 KB · Views: 10,691
PR 10 - More Photos

3ttt Seat works well visually, ties in well with the overall appearance. Snatched it a laughable price.

Put some Campag down shifters on, really wanted some simplex ones but could not source any. I have a set of Shimano Arabesque which I toyed with putting on but didn't in the end as I thought I would keep it all European - (In truth the shimano bits are better made though.)

Kept the Criterium front Mech, which works suprisingly well.

I replaced the bottom bracket with a very tidy Velo Orange Grand Cru French threaded item which I am well pleased with.

French Threads are a pain in the arsenal...
 

Attachments

  • 8 Bottom Bracket.JPG
    8 Bottom Bracket.JPG
    55.4 KB · Views: 10,685
  • 7 Head tube.JPG
    7 Head tube.JPG
    45 KB · Views: 10,685
  • 4 3ttt SL Saddle.JPG
    4 3ttt SL Saddle.JPG
    54.8 KB · Views: 10,685
  • Spidel Quill pedals.JPG
    Spidel Quill pedals.JPG
    58.7 KB · Views: 10,685
Nice job. Looks really good in the silver. I like the gold downtube shifters as well. Just sort that saddle out will you?

Mark.
 
daccordimark":23yw2p3v said:
Nice job. Looks really good in the silver. I like the gold downtube shifters as well. Just sort that saddle out will you?

Mark.

I was going to say that but I'm much to polite ;)

I like the finish with the 'speckles' in it. What is it called?

Oh, BTW, it's ThEvenet not Thavenet. My daughter's partner (who is French) knows him (very) slightly.
 
Thevenet....homage

Thanks for the compliments much appreciated....

apologies about the spelling.. Thevenet.

Got her powdercoated in Hackney - Armourtex.
The guy just told me best silver!!! - Think they did a good job.

I had frame and two forks done. masked and clear lacquered for less than £100.

I'll take on board the moans about the saddle!!

Toomski
 
Like the red one. :LOL:

Only kidding, it looks fantastic, love the colour, and the smatering of gold.

You've done a excellent job.

Where did you get the transfers...
 
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Now if only I could find the original in a skip

Here's the pics that influenced the rebuild.

Also my very first drop handlebar was a Pug, I promptly crashed it into a wall after 2 days of ownership in Christmas '79. Mashing my head and mangling the bike...... ah sweet nostalgia.
 
Back
Top