Raleigh Super Lenton 1956 22" frame

Really coming up lovely.
It's such a nice frame now it's cleaned and keeps it's patina. It just wouldn't look as nice with a fresh crisp paint job, I think it would lose it's character which shows it has a long history.
Looking forward to seeing this progress. keep up the good work.

Jamie
 
I think you've definitely chosen the right path for this bike,keeping all its history and character intact and just removing the grime.

I look forward to the next instalment..
 
Many thanks for all your feedback - I’m reporting some progress with the bike’s ancillaries. I spent some time cleaning up the chain wheel and cranks, and the pedals, and the chain. I also dismantled and re-greased the pedals: 11 ball-bearings each side, 22 per pedal, and I didn’t lose any! See pics.

What surprised me was: there’s been some chrome loss, however there wasn’t that much wear apparent on the original components, despite the bike being in fairly regular use by the first owner over 62 years.
Guess a lot of stuff was built to last way back in the 1950’s !!

Even the original RENOLD Elite chain wasn’t that worn, and will be going back on the bike. It has 107 links, 5 or so more than standard, to accommodate the Benelux derailleur. I notice that the split chain link was deleted, when fitting the derailleur, as per guidance at the time.

Anyway the above stuff is now looking a bit more “presentable” and has been re-fitted to the frame, the front hub is dated 56 8, and the rear 56 9.
I’ll get both tyres replaced in due course (sensible :) ) … guess I’m being a wee bit impatient but I just want to get the thing back on the road first !!
 

Attachments

  • DSC01483 (1024x768).jpg
    DSC01483 (1024x768).jpg
    102.6 KB · Views: 1,302
  • DSC01488 (1024x768).jpg
    DSC01488 (1024x768).jpg
    135 KB · Views: 1,302
  • DSC01486 (1024x768).jpg
    DSC01486 (1024x768).jpg
    155.8 KB · Views: 1,303
  • DSC01476 (1024x768).jpg
    DSC01476 (1024x768).jpg
    28 KB · Views: 1,301
  • DSC01477 (1024x768).jpg
    DSC01477 (1024x768).jpg
    43.3 KB · Views: 1,300
  • DSC01480 (1024x768).jpg
    DSC01480 (1024x768).jpg
    65.1 KB · Views: 1,300
  • DSC01479 (1024x768).jpg
    DSC01479 (1024x768).jpg
    93.4 KB · Views: 1,301
Excellent work those wheels look fantastic compared to the previous pics must have taken an age to clean them.
 
Fantastic ! im wondering how the original owner could bring himself to sell it after all those years !?
 
Yeah a reluctant sale, the original owner had stopped using the bike on account of health reasons.
Thanks for the encouraging comments.
Re the wheels, the rear had a lot of rust, and could probably still do with a bit more work from me.
Whereas the front was mostly grime (old oil and grease) and cleaned up reasonably well.

Going forward, the philosophy I’m now using is: if it’s not too worn, clean & rebuild it and re-use it.

So I’ve been working on the original drop handlebars and stem. The chrome handlebars have come out reasonably okay, a bit pitted in places, and loss of chrome at the right-hand side. The Raleigh Industries stem is a bit pitted and not in the best condition (to say the least). I might hunt around for a like-for-like replacement. However they’re both straight and true, and back on the bike. See pics.
The ‘bars originally had a couple of green rubber “shock stop” bar-ends, although one went AWOL a long time ago – I’ll see if I can track down something equivalent.
One of the rivets on one of the sides of one of the quill pedals was a bit loose, however I managed to sort it with a cold chisel and lump mallet … the subtle approach ….

Next project task: the combination Sturmey Archer and Cyclo gears!
 

Attachments

  • Handlebars fitted (1024x768).jpg
    Handlebars fitted (1024x768).jpg
    150.2 KB · Views: 1,251
  • Bars and Stem. (1024x768).jpg
    Bars and Stem. (1024x768).jpg
    92.7 KB · Views: 1,251
  • Bars and Stem (1024x768).jpg
    Bars and Stem (1024x768).jpg
    83.7 KB · Views: 1,251

Latest posts

Back
Top