Retrobike Forum Index

It is currently Mon Dec 11, 2017 6:37 pm

* Login   * Register * Search  * FAQ



Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Bridgestone Radac RD-570
PostPosted: Thu Nov 23, 2017 2:41 pm 
Old School Grand Master
User avatar

Joined: Mon Nov 20, 2006 10:12 pm
Posts: 4698
Location: Barry
Image

Got this for £50 on ebay. My photo makes it look in better condition than it is but its not too bad. Rear end is 130mm already so may build it with modern parts but first job is to take it apart and clean it. I have the wheels also but they need a service.


Top
 Profile  
 
PostPosted: Thu Nov 23, 2017 3:50 pm 
Old School Grand Master
User avatar

Joined: Fri Dec 10, 2010 10:40 pm
Posts: 3802
Location: The Royal Society of Insobriety
Awesome, really pleased you picked this up as I wanted to but managed to stop myself :-)

I have the same frame but the 'hybrid' version (OK, OK, I have two of them), which is, I think, identical in construction except it has no down tube bosses, cable routing for the rear mech only and the integrated cable goes through the top tube on the non-drive side, even the decals of one look the same.

Can you confirm the seat post is a 25.8 and the weight of the frame/fork/headset (if you can be arsed)?

Anyway, what's the plan? Keeping the totally rad Sakae stem with integrated bell? Are the bars Sakae steel too (they were on my RB2, replacing them saved about 500 grams!)? If you replace the brakes/seat post/stem/saddle let me know as I could use them for one of mine.

By the way, I have heard people reference having found these in a catalogue, but I am yet to find any internets evidence, these are Japanese Bridgestone and whilst some claim Grant Petersen had a hand in the design and development my understanding from his writing is that he did not, but he did use the technology at Bridgestone USA.


Top
 Profile  
 
 Post subject: Re:
PostPosted: Fri Nov 24, 2017 1:03 am 
Old School Grand Master
User avatar

Joined: Mon Nov 20, 2006 10:12 pm
Posts: 4698
Location: Barry
Bit of bad news... the rear derailleur hanger has been completely stripped of its thread! Filed out to fit a bigger bolt through FFS. You can just see the bolt in the pic above. Everything bar the pedals came off easily, NDS pedal and crank soaking in plusgas now. Frame weighs just over 5lbs so not a lightweight!

Tempted to SS it, will use mostly the same parts just new cables etc.


Top
 Profile  
 
PostPosted: Fri Nov 24, 2017 5:41 am 
r.B.o.T.M. & P.o.T.M. Winner
r.B.o.T.M. & P.o.T.M. Winner
User avatar

Joined: Thu Nov 22, 2007 10:51 am
Posts: 2462
Location: Camel Land
This may help you
https://www.sjscycles.co.uk/accessories ... ch-hanger/


Top
 Profile  
 
 Post subject: Re:
PostPosted: Fri Nov 24, 2017 11:04 am 
Old School Grand Master
User avatar

Joined: Mon Nov 20, 2006 10:12 pm
Posts: 4698
Location: Barry
Thanksyou thats brill :D

I was thinking of something similar as I dropped off last night!


Top
 Profile  
 
PostPosted: Fri Dec 08, 2017 6:14 pm 
Old School Grand Master
User avatar

Joined: Fri Dec 10, 2010 10:40 pm
Posts: 3802
Location: The Royal Society of Insobriety
How's it going?


Top
 Profile  
 
PostPosted: Fri Dec 08, 2017 7:45 pm 
Old School Grand Master
User avatar

Joined: Mon Nov 20, 2006 10:12 pm
Posts: 4698
Location: Barry
Tiny bit of progress basically I'm looking for some suitable tyres and then I'll stick it back together. Probably as a SS for now though I've ordered that dropout saver as linked above. The NDS pedal was very stuck but some heat and a ring spanner got it loose today! Going to use all the same parts except SPDs and possibly a new saddle. New brake blocks and cables etc also.

Image

Image


Top
 Profile  
 
PostPosted: Fri Dec 08, 2017 7:49 pm 
Gold Trader
Gold Trader
User avatar

Joined: Mon Jan 15, 2007 11:40 am
Posts: 3253
Looks like the main tubes are bonded into logs, similar to vitus?

Interested in the heating / ring spanner trick... I have some dura ace cranks with a stuck pedal. Anythings to be aware of, or just heat and go? Not sure I'll be able to get the pedal off and leave the pedal spindle though


Top
 Profile  
 
PostPosted: Fri Dec 08, 2017 8:19 pm 
Old School Grand Master
User avatar

Joined: Mon Nov 20, 2006 10:12 pm
Posts: 4698
Location: Barry
Heat on the hob until hot enough that water bubbles on them and then use a normal spanner. Hopefully it works but if not ring spanner made all the difference to me- good luck!

Havent been out on it yet but apparently its stiffer than a Vitus.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: maxhc, Mr.Toad and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron

About Us

Follow Retrobike

Other cool stuff

All content © 2005-2015 Retrobike unless otherwise stated.
Cookies Policy.
bikedeals - the best bike deals in one place
FatCOGS - Fat Chance Owner's Group

Powered by phpBB® Forum Software © phpBB Group