- Feedback
- View
I have an unfinished project that I have had for a few years that's taking up space and sadly I wont get it finished. Pretty sure I could sell it but don't need the hassle and my mechanical knowledge lacking so would rather it went down the KARMA route 
All I ask is postage and I hope that it gets built and used. I bought it from a well respected Retrobike member a few years ago. Frame has scuffs and scratches and surface rust bit has lots of life left. Ideal for Station bike, or a home respray or cheap powdercoat.
Raleigh 531 Lightweight Frame and Forks, large in white/mint green. If I remember correctly it was available as a frame/forks only.
Top tube 21.5" and seat tube 22"
Mavic MA2 rims with Miche Hubs, surfaces ok, spin freely but would benefit from regreasing.
Spare front rim Mavic Open Pro with Ultregra hub (a little gritty but ideal as spare)
RX100 175mm crank with 52/36 Tioga rings
RX100 front and rear derailliers
Shimano 105 downtube shifters
New 7 speed screw on Shimano freewheel
Unbranded ? seatpost
I may be able to locate some other bits after a trip in the loft.
Photos later, but can email if required.
All I ask is postage and I hope that it gets built and used. I bought it from a well respected Retrobike member a few years ago. Frame has scuffs and scratches and surface rust bit has lots of life left. Ideal for Station bike, or a home respray or cheap powdercoat.
Raleigh 531 Lightweight Frame and Forks, large in white/mint green. If I remember correctly it was available as a frame/forks only.
Top tube 21.5" and seat tube 22"
Mavic MA2 rims with Miche Hubs, surfaces ok, spin freely but would benefit from regreasing.
Spare front rim Mavic Open Pro with Ultregra hub (a little gritty but ideal as spare)
RX100 175mm crank with 52/36 Tioga rings
RX100 front and rear derailliers
Shimano 105 downtube shifters
New 7 speed screw on Shimano freewheel
Unbranded ? seatpost
I may be able to locate some other bits after a trip in the loft.
Photos later, but can email if required.
