I have loads of parts for sale, more to be added as and when… prices include postage to the UK/europe (from Spain) and are open to reasonable offers. Pics to be added soon
Thanks!
BRAKES
Shimano RX100 dual pivot, short drop, original pads, very nice condition 30 GBP
Shimano Dura Ace 7400 single pivot, one adjuster O ring missing. 40 GBP
Shimano 600AX need a good polish. No adjusters. 20 GBP
Zeus New Racer, 20 GBP
BRAKE LEVERS
Shimano 105, good condition. 20 GBP
Shimano 600AX, no hoods but the ferrules are included. 12 GBP
NOS NIP Ultegra 6400 aero brake lever hoods in white. Shimano part number 87E9811. 30 GBP
Almost new white lever hoods for campag 10 speed ergo levers. Not sure on make (they're not original Campagnolo). Mounted and used for a few short rides then taken off again. 25 GBP
REAR MECHS
Shimano RX100. Good condition. 20 GBP
Shimano 300 EX. Good condition but basic. 10 GBP
Shimano Ultegra 6401 8 speed. scratched but working. 20 GBP
Shimano 1050. good condition. 20 GBP
FRONT MECHS
Campagnolo Chorus 10 speed 31.8mm band on. Logo faded, otherwise good. 25 GBP
Shimano RX100 28.6mm band on. 12 GBP
Shimano Ultegra 6400 braze on. 15 GBP
GEAR LEVERS
Shimano RX100 7 speed. 15 GBP
SEATPOSTS
2 Erres Aero style, 25.4mm. Scratched on the round section. 20 GBP
3TTT Fluted, 26.6mm. Very Good condition. 25 GBP
PEDALS
TIME, no cleats. Seem to be OK. Postage only, but that’s 12.60 euros because they weigh a ton!
LOOK KEO Carbon. The right one is broken but the axle and bearings are good. Left one is OK. SELLING AS SPARES ONLY. 9 GBP
SADDLES
Selle Bassano, adjustable width. 20 GBP
Selle Italia Nitrox. Good condition. 20 GBP
STEMS and HANDLEBARS
3TTT, black, 100mm. Logo decent. 15 GBP
Nukeproof Warhead, 110mm 31.8mm bar diameter, 1 1/8” stem. Great condition. 30 GBP
Kalloy (?) black ahead stem, 110mm long, for 1 1/8" steerer and 26.0mm bars. 10 GBP
Cinelli Spinaci extensions. Silver. Ok condition but a couple of the bolts are rusted. 12 GBP
Modolo bars and stem. I'm not sure of the model. Stem is 95mm long. Bars are marked onthe end as "44 09 93". I'm guessing that's 44 cm, made in 09/93. Or maybe 44cm width, 9 cm forward sweep? Nice anatomic shape. Single groove for brake cable. 35 GBP
CHAINSETS
Mismatched Ofmega RH and Zeus LH cranks. Both 170mm. With chainrings. 30 GBP
Shimano 1050 170mm arms only. Might have some rings and bolts for them. 30 GBP
Stronglight 52t 135 BCD chainring, new and unused. 15 GBP
Ofmega CX, 172.5mm, original chainrings (42/52), bolts and dust caps. VVGC. 55 GBP
Ofmega Super Competizione, 172.5mm, original 52T outer, replacement 41T TA inner chainring. One chainring bolt has been replaced with a non-branded one, and the dust caps are both Ofmega but non-matching. Pedal threads were 14x1.25 (french) but have been retapped to 9/16" and take a standard pedal perfectly. I'd be keeping this one but even with the correct Ofmega BB I can't quite get enough chainstay clearance on the bike I'm building. 50 GBP
HEADSETS
Campagnolo Triomphe 25x1 french threaded, mint. 55 GBP
Shimano Dura Ace 7400 25x1 french threaded, VGC. 55 GBP
Zeus 2000, mint. 55 GBP
WHEELS
Campag record (NR/SR type) 32 hole hubs laced to more modern Mavic SUP rims, CD finish. Bearings are smooth, wheels are straight and true. Both hubs are marked as record. Non-original QR's fitted (not sure what make but they look to suit the wheels OK) The rear spindle is 140mm total length, OLN 130mm (so has probably had a spacer added to make it fit more modern frames) Front is 100mm OLN. Italian threaded freewheel. 125 GBP posted
Campag record (NR/SR type) hubs on almost new MA40 clincher rims (braking surface hardly marked at all). Strangely, front is 36h, rear is 32. Bearings and smooth, both wheels straight and true. Rear hub is marked as Record, spindle is 145mm total length, OLN is 130mm so I think this one might have had the spindle swapped for a longer one and respaced. Front hub is marked "S-U" and is 100mm. Italian threaded freewheel. No QR's (but could take the ones from the other set of wheels). 125 GBP posted
BOTTOM BRACKETS
Specialites TA AXIX. Sealed bearings. 113mm. Marked "ANC 113 J9" so I think that means JIS taper. Italian threaded. Very good. 30 GBP
SKF sealed unit. 110mm. I think it's JIS taper, but not 100% sure. English threaded. Sealed bearings still very smooth but with a tiny amount of play. 20 GBP
ZEUS. Spindle is marked "109x57". 109mm, symmetrical. Italian threaded. Very good condition, no signs of pitting to bearing races. 30 GBP
ZEUS. Spindle marked "118x55". 118mm. Asymmetrical. French threaded. Very good condition. 30 GBP
Ofmega. Spindle marked "70 C". 117mm. Asymmetrical. Italian threaded. Good condition but some signs of pitting. 25 GBP
Campagnolo spindle Number 1: "68-SS", 115mm, asymmetrical. Excellent condition, no signs of pitting. 17 GBP
Campagnolo spindle Number 2: "70-SS", 109mm, Symmetrical. Excellent condition, no signs of pitting. 17 GBP
Campagnolo spindle Number 3: "70-SP", 109mm, Symmetrical. Good condition, signs of wear to the bearing surfaces but no pitting. 17 GBP
Suntour Superbe Pro. "68-S", 109mm, Symmetrical. Good condition. very light signs of pitting to the bearing surfaces. 17 GBP
SOLD
ANPI Campag NR/SR copy. 25.8mm with my calipers (diameter isn’t marked on it). 15 GBP
Campagnolo Record 10 speed (dual pivot front, single pivot rear). Very good condition, with pad holders but no pads. 45 GBP
Shimano 105, working but condition not great. 12 GBP
Selle Italia. Red and scruffy. 12 GBP
Selle Italia Turbomatic 2. Scruffy but useable. 12 GBP
Thanks!
BRAKES
Shimano RX100 dual pivot, short drop, original pads, very nice condition 30 GBP
Shimano Dura Ace 7400 single pivot, one adjuster O ring missing. 40 GBP
Shimano 600AX need a good polish. No adjusters. 20 GBP
Zeus New Racer, 20 GBP
BRAKE LEVERS
Shimano 105, good condition. 20 GBP
Shimano 600AX, no hoods but the ferrules are included. 12 GBP
NOS NIP Ultegra 6400 aero brake lever hoods in white. Shimano part number 87E9811. 30 GBP
Almost new white lever hoods for campag 10 speed ergo levers. Not sure on make (they're not original Campagnolo). Mounted and used for a few short rides then taken off again. 25 GBP
REAR MECHS
Shimano RX100. Good condition. 20 GBP
Shimano 300 EX. Good condition but basic. 10 GBP
Shimano Ultegra 6401 8 speed. scratched but working. 20 GBP
Shimano 1050. good condition. 20 GBP
FRONT MECHS
Campagnolo Chorus 10 speed 31.8mm band on. Logo faded, otherwise good. 25 GBP
Shimano RX100 28.6mm band on. 12 GBP
Shimano Ultegra 6400 braze on. 15 GBP
GEAR LEVERS
Shimano RX100 7 speed. 15 GBP
SEATPOSTS
2 Erres Aero style, 25.4mm. Scratched on the round section. 20 GBP
3TTT Fluted, 26.6mm. Very Good condition. 25 GBP
PEDALS
TIME, no cleats. Seem to be OK. Postage only, but that’s 12.60 euros because they weigh a ton!
LOOK KEO Carbon. The right one is broken but the axle and bearings are good. Left one is OK. SELLING AS SPARES ONLY. 9 GBP
SADDLES
Selle Bassano, adjustable width. 20 GBP
Selle Italia Nitrox. Good condition. 20 GBP
STEMS and HANDLEBARS
3TTT, black, 100mm. Logo decent. 15 GBP
Nukeproof Warhead, 110mm 31.8mm bar diameter, 1 1/8” stem. Great condition. 30 GBP
Kalloy (?) black ahead stem, 110mm long, for 1 1/8" steerer and 26.0mm bars. 10 GBP
Cinelli Spinaci extensions. Silver. Ok condition but a couple of the bolts are rusted. 12 GBP
Modolo bars and stem. I'm not sure of the model. Stem is 95mm long. Bars are marked onthe end as "44 09 93". I'm guessing that's 44 cm, made in 09/93. Or maybe 44cm width, 9 cm forward sweep? Nice anatomic shape. Single groove for brake cable. 35 GBP
CHAINSETS
Mismatched Ofmega RH and Zeus LH cranks. Both 170mm. With chainrings. 30 GBP
Shimano 1050 170mm arms only. Might have some rings and bolts for them. 30 GBP
Stronglight 52t 135 BCD chainring, new and unused. 15 GBP
Ofmega CX, 172.5mm, original chainrings (42/52), bolts and dust caps. VVGC. 55 GBP
Ofmega Super Competizione, 172.5mm, original 52T outer, replacement 41T TA inner chainring. One chainring bolt has been replaced with a non-branded one, and the dust caps are both Ofmega but non-matching. Pedal threads were 14x1.25 (french) but have been retapped to 9/16" and take a standard pedal perfectly. I'd be keeping this one but even with the correct Ofmega BB I can't quite get enough chainstay clearance on the bike I'm building. 50 GBP
HEADSETS
Campagnolo Triomphe 25x1 french threaded, mint. 55 GBP
Shimano Dura Ace 7400 25x1 french threaded, VGC. 55 GBP
Zeus 2000, mint. 55 GBP
WHEELS
Campag record (NR/SR type) 32 hole hubs laced to more modern Mavic SUP rims, CD finish. Bearings are smooth, wheels are straight and true. Both hubs are marked as record. Non-original QR's fitted (not sure what make but they look to suit the wheels OK) The rear spindle is 140mm total length, OLN 130mm (so has probably had a spacer added to make it fit more modern frames) Front is 100mm OLN. Italian threaded freewheel. 125 GBP posted
Campag record (NR/SR type) hubs on almost new MA40 clincher rims (braking surface hardly marked at all). Strangely, front is 36h, rear is 32. Bearings and smooth, both wheels straight and true. Rear hub is marked as Record, spindle is 145mm total length, OLN is 130mm so I think this one might have had the spindle swapped for a longer one and respaced. Front hub is marked "S-U" and is 100mm. Italian threaded freewheel. No QR's (but could take the ones from the other set of wheels). 125 GBP posted
BOTTOM BRACKETS
Specialites TA AXIX. Sealed bearings. 113mm. Marked "ANC 113 J9" so I think that means JIS taper. Italian threaded. Very good. 30 GBP
SKF sealed unit. 110mm. I think it's JIS taper, but not 100% sure. English threaded. Sealed bearings still very smooth but with a tiny amount of play. 20 GBP
ZEUS. Spindle is marked "109x57". 109mm, symmetrical. Italian threaded. Very good condition, no signs of pitting to bearing races. 30 GBP
ZEUS. Spindle marked "118x55". 118mm. Asymmetrical. French threaded. Very good condition. 30 GBP
Ofmega. Spindle marked "70 C". 117mm. Asymmetrical. Italian threaded. Good condition but some signs of pitting. 25 GBP
Campagnolo spindle Number 1: "68-SS", 115mm, asymmetrical. Excellent condition, no signs of pitting. 17 GBP
Campagnolo spindle Number 2: "70-SS", 109mm, Symmetrical. Excellent condition, no signs of pitting. 17 GBP
Campagnolo spindle Number 3: "70-SP", 109mm, Symmetrical. Good condition, signs of wear to the bearing surfaces but no pitting. 17 GBP
Suntour Superbe Pro. "68-S", 109mm, Symmetrical. Good condition. very light signs of pitting to the bearing surfaces. 17 GBP
SOLD
ANPI Campag NR/SR copy. 25.8mm with my calipers (diameter isn’t marked on it). 15 GBP
Campagnolo Record 10 speed (dual pivot front, single pivot rear). Very good condition, with pad holders but no pads. 45 GBP
Shimano 105, working but condition not great. 12 GBP
Selle Italia. Red and scruffy. 12 GBP
Selle Italia Turbomatic 2. Scruffy but useable. 12 GBP
