The Shed Tat List Edited.

jm

Senior Retro Guru
Wheels
27x11/4 wheels Weinman rims 36 hole Maillard hubs,Michelin World Tour tyres very good and hubs greased and smooth.5 spd freewheel and DID chain.£65.

Headsets.
Stronglight A9 V/Good not pictured yet.£15.

Canti's
Shimano LX Black lo pro set of 4 £15
Suntour XC Pederson S/E Rear std front set of 4 £25
Dia Compe 986 non lo pro two £7.50
Shimano Exage lo pro two £750

Levers
Avid SD2.0 from 1995 Marin £15

Front Mechs
Shimano R440 28.6 Double front mech £15
Shimano 1056 28.6 Double front mech £12.50
Shimano AX600 28.6 Double front mech £15
Suntour Superb 28.6 Double front mech £20
Shimano XT 31.8 top swing down pull £10

Rear Mechs
Suntour Superb rear mech £25

Seat Post
X Lite click on 25.4 dia NOS £25

Chain Rings
Mavic 42t 130 bcd £12.50
Dura Ace 54t 130 bcd £15
TA 46t and 50t 144 bcd £20 each
Campag Record 56t 144 £20
Campag 53t 135 £7.50

C/Sets
SR Apex C/set 42/52 rings 144 bcd I think so will fit Campag £20.
SR Polished 42/52 VGC Best Quality ive seen inc b/b.£30

Hubs
Dura Ace NOS rear hub 130mm could be 126mm if needed 32 hole.£50.
Sachs hub set cartridge bearings shimano 8/9 cassette body smooth bearings road use only 32 hole 135mm rear spacing no skewers £30
Sachs rear hub cartridge bearings smooth 36 hole 135mm spacing shimano 8/9 cassette body £20
Shimano XT Rear 32 hole smooth road use only £17.50
Shimano front 36 hole early 80’s no skewer NOS £12.50
Campagnolo 32 front hub steel barrel no skewer not much chrome left smooth bearings £10

Skewers
Ultegra front skewer new £7.50
XT front skewer new £7.50
Early Shimano front skewer flat blade poor con £3.50



This is the start all must go.
All prices inc post.
Paypal “GIFT” is best but cheques no problem.

Pics Here http://www.flickr.com/photos/45080961@N ... 253887284/

http://www.flickr.com/photos/45080961@N ... 404576076/

http://www.flickr.com/photos/45080961@N ... 342045858/
 
Dibs on "Dura Ace NOS rear hub 130mm could be 126mm if needed 32 hole. £50" For Kingcutter. I assume that it is 9 speed compatible?
 
Should of put that it is a screw on not a cassette but if you can find a 9spd freewheel away you go.jm.
 
Back
Top