I repaired the brake mount. I brazed some new bit's in. I also welded a bit to the brake hose retainer, it had been partially cut away[I did this bit after I decided to repaint the back of the frame].
I managed to do the repair and only needed to paint the pressed sheet metal bit.
No damage to the paint on the other side of the weld, but were some areas of paint
worn off from muddy tyres[?] which also needed paint, I thought I would get away with
painting these bit's black.
I went through the cans of paint I have and found some Alfa Rosso, so I started prepping a few of the larger chips, as I joined a few chips up I ended up sanding the
paint off the back of the frame, didn't take long to sand the paint off. If I wasn't nearly
out of stripper I would have stripped the frame and painted the whole thing, probably no more work than painting half of it
rl-frame02.jpg [ 33.16 KiB | Viewed 928 times ]
Senoras y senoras, nosotros tenemos mas influencia con sus hijos, que tu tiene Pero los queremos Creado y areglado De Los Angeles Juana's adiccionShit For Sale