New hardtail...Cotic BFe

Mindmap3

Senior Retro Guru
Feedback
View
As many of you will know or have read, my Tazer is cracked where the original ones always cracked - at the seat tube and sea t stay junction. I could try and have it welded but it isn't reall economical by the time you factor in powder coating, decals and frame facing.

So, I decided to try a hardcore steel hardtail as I've only ever had one steel bike (my 1997 Rockhopper which got nicked a few weeks after I bought it). After a bit of eBay trawling nothing really came up and I was inspired ny Reanimation's BFe. I put a wanted thread on STW and a chap mentioned that Cotic were selling some XS seconds frames cheap...a couple of emails and a phone call later I bought on.

They had a batch that have a potentially oversized weld on the drive side that may or may not catch the chain when in the smallest cog. The weld on mine looks fine and I'm not too fussed as I never use that gear anyway!

Frame arrived today...paid for it Wednesday, sent yesterday next day for no extra cost.

Here are a few pics...

807aca644fad5ecc32f5cb49ba86e77c.jpg


ecaa4bf479f82f2a5a59faf4fd645866.jpg


35f45f4521e78316abc478dfee268c9b.jpg


8f96ee9761e1d7e34f812d09235c24f5.jpg


Can't wait to get it built up over the weekend...and the weather is warming up just in time.

Also received a Superstar Plasma chain device as my Gamut won't work because its old ISCG and the new frame s ISCG05.
 
Basically yes, the only changes will be the chain device and cranks...I'm swapping the Disbolus for some Deus cranks that I picked up cheap. I love the Diabolus cranks (they have flames on them!) but they weigh a ton.

Eventually the brakes will go too as I'm not a fan. I'll swap them fr some we Deores...a set from Germany is just under £70.
 
Bit of work done this morning...

e793fc16cd2a7ff1d68a598d13b72e32.jpg


b9b634835d20e847505a5a0704fe7821.jpg


41321efee64044b853070234d24eed27.jpg


Just need to clean up my mech, chain and new cranks. I won't be able to do the gears today, because I haven't got a long enough piece of Goodridge outer for the last section, which goes from the seat you've to the mech as one continuous length.

The back of the chain guide needs filing slightly as it just catches the chain stay.

Pleased with it so far though.
 

Latest posts

Back
Top