Harryburgundy
Gold Trader
- Feedback
- View
1991 Merlin Frame.
3/2.5 Titanium
1" head-tube.
Press-fit Grease Control bottom bracket.
132.5mm rear axle spacing.
Bottom bracket bearings are okay...a little notchy but seem fine with a crankset fitted. I have packed some fresh grease in it...overall I would give them 4 out of 10.
Original grease gun supplied.
The frame has no dents or dings, some very minor cable rub and chain slap.
Decals are good rather than excellent.
Size is Merlin Large as classified in the 1991 Catalogue.
£499 + fully insured shipping.
Pictures here
http://s911.photobucket.com/albums/ac31 ... %20Merlin/
3/2.5 Titanium
1" head-tube.
Press-fit Grease Control bottom bracket.
132.5mm rear axle spacing.
Bottom bracket bearings are okay...a little notchy but seem fine with a crankset fitted. I have packed some fresh grease in it...overall I would give them 4 out of 10.
Original grease gun supplied.
The frame has no dents or dings, some very minor cable rub and chain slap.
Decals are good rather than excellent.
Size is Merlin Large as classified in the 1991 Catalogue.
£499 + fully insured shipping.
Pictures here
http://s911.photobucket.com/albums/ac31 ... %20Merlin/
Come on chaps, I have a cranks and Ti stem to buy, need the money 
