GoldenEraMTB 's Garage Sale (FINAL CLEAR OUT?!?!)

GoldenEraMTB

Old School Grand Master
Feedback
View
Feel free to ask questions and make offers, even if low balling if you preferred method of negotiations- I can take it. Prices do not include shipping, but I gladly ship internationally. All prices are in US Dollars, and I ask that all payments be submitted in USD. Thanks

Updated on July 24, 2013

➡️ Claudio Chiappucci Selle Italia Mythos El Diablo (That's a mouthful); 1993, vanadium rails, flames, devil, yadayadayada; good condition, some wear and tear; all visible in the photos, (had a NOS one of these that I sold on ebay a month or two ago for $200); asking price: $75 USD
IMG_3086_zpsabbf1f0e.jpg

IMG_3090_zpsc26ec1b7.jpg

IMG_3091_zpsf1fa2a34.jpg

IMG_3087_zps5693aaf0.jpg

IMG_3094_zpsfca6457e.jpg

IMG_3095_zps720f4ca9.jpg

IMG_3096_zps4af13734.jpg





more to come...




__________________________________________________________________________________________________________________________
***No longer available/Sold stuff below***


➡️ Specialized Stumpjumper Sport $5.50 USD SOLD

➡️ Avocet Gel Flex R30 Mountain Spenco Gel saddle: $35 USD SOLD

➡️ 1996 Selle San Marco Bontrager Titanium Sadle; light and functional, but rough around the edges; would make a good rider/beater/pub bike saddle; $30 USD SOLD

➡️ 1985 Avocet Touring Touring saddle; believe the cover to be synthetic material; very good condition $35 USD SOLD

➡️ Salsa Stem with Salsa decal, excellent condition: 130mm , 1" , 0 degree rise, 26.0 handlebar clamp size. I fitted a mtb bar with a thin rubber shim- $25.00 USD SOLD


➡️ Salsa Stem, no decal, excellent condition: 130mm , 1" , 0 degree rise, 25.4 handlebar clamp size. I fitted a mtb bar with a thin rubber shim- $20.00 USD SOLD


➡️ Dia Compe Threadhead, threaded 1 1/8" headset (from the makers of the threadless aheadset); very good condition; somewhat rare- $35.00 USD SOLD


➡️ Shimano M700 Deerhead FD, standard steel MTB clamp size, probably 28.6 or thereabout, it is not indicated on the clamp, bottom pull- $25.00 USD SOLD

➡️ Shimano M700 Deerhead FD, standard steel MTB clamp size, probably 28.6 or thereabout, it is not indicated on the clamp, bottom pull- $25.00 USD SOLD


➡️ It's a Rock Shox Judy SL, in either 63mm or 80mm travel; thought it was 63, but in doing some comparing tonight, might be close to 80. Ti hardware; Risse Racing Air Cartridge upgrade, complete with pump, wiper seals with boots to protect stancions, extra set of longer boots, and extra steerer crown due to the steerer that is currently installed having a slice/gouge that looks iffy. Installed steerer is 1 1/8" with 190mm length, additional steerer is 1 1/8" with 178mm length. Fork works great.
$140 USD SOLD


➡️ A smaller Bullmoose bar; 1" (21.1mm) and 615mm width; bar is bare with no hardware- $12.00 USD SOLD


➡️ Salsa Moto Ace Stem with salsa top cap; 1 1/8", 120mm with 5 degree rise, for 25.4 handlebar. Like new condition. $12.00 USD SOLD


➡️ Profile Design BOA stem, approximately 80mm, with a hi-rise design (at least 25 degrees), removable face plate, well made and lightweight- $12.00 USD SOLD


➡️ FSA XC 120 Alloy stem 1 1/8" 105 mm 6 degrees 25.4 handlebar clamp- $10.00 USD SOLD


➡️ FSA XC 140 Alloy stem 1 1/8" 110 mm 6 degrees 25.4 handlebar clamp- $15.00 USD SOLD
➡️ Suntour Mountech MTB Rear Derailleur, 3.25" cage; a bit longer cage for that era (Mid-80's) of RD; good working condition- $25.00 USD SOLD


➡️ Shimano M700 Deerhead Rear Derailleur; 3" cage; great for a mid-80's MTB build (1983 on). Cosmetic blemishes; great working order- $25.00 USD SOLD


➡️ Shimano 600 FD 6207 bottom pull, not sure if this was for the three ring 600 series or two ring; not sure if it makes a difference, have to research it.- $25.00 USD SOLD

➡️ Real Product Design INC, made in USA, Forged Brake Shoes, red anodized, NOS, two wheels worth of brake shoes, rubber feels hard, so more for looks than real use, I would imagine- $30.00 USD SOLD


➡️ 1998/1999 Rock Shox SID (Race?), 195mm steerer length; great condition inside and out, 1 1/8" steerer diameter- $160 USD SOLD

➡️ Titec Titanium stem, 1 1/8", 135mm- $75.00 USD SOLD

➡️ Titec (Bontrager) Titanium Handlebar; great condition; 22" wide with a bit of sweep- $50 usd SOLD

➡️ 1996 Selle Italia Flite Ti saddle harlequin Red/Black- $45.00 USD SOLD

➡️ Shimano Deore XT m730 seatpost 27.0mm, in good condition, but does have some corrosion on front side, see pics- $50 Sold

➡️ black deore xt m730 170mm 110 bcd square taper- $50.00 usd SOLD

➡️ XTR M950 V-brake, complete one wheel's worth- $37.00 USD Sold

➡️ Salsa 1" Quill stem, 130mm length; the visible portion is in great shape; the lower portion that slides into the headtube for most people is a bit rough. looks like someone left a citrus cleaner on it too long; smells like it too.- $40.00 USD SOLD

➡️ Syncros Riser Bar, 620mm length- $25.00 USD SOLD

➡️ 1986 Suntour XC 26.8 Seat post, 300mm from bottom to clamp, in fair condition- $35 SOLD

➡️ Easton Monkey Lite CT2 Carbon Fiber Riser handlebar 8 deg, 175 grams, 660mm- $57.00 usd Sold

➡️ Paul V-brake levers, front and back, complete set. Pictured are levers that are gone; this is for the V-brakes pictured without the levers- $162 USD SOLD

➡️ Soma 3-Speed Moustache Bar, Width: 505mm, Drop: 60mm,
25.4mm center, 320 grams (advertised) $20 usd SOLD

➡️ Chris King Headset, gold, incomplete, but in excellent condition (missing top cap, starnut, and crown race for the fork) 1 1/8"- $50 usd SOLD
➡️ 1996 Judy FSX 1 1/8" with canti hanger, plush; carbon fiber doesn't shine, but otherwise fine, missing a couple decals, please see pics and ask questions -$250 Sold

➡️ 1998 Judy SL with both canti and disc brake mounts (misplaced the canti mounts/posts, but should find them again, if not, I'll take $10 off the price). 1 1/8th steerer tube, 7 1/4" steerer length; Englund/Riesse (not sure which) air/oil conversion upgrade; no decals; one gouge/scratch on one of the stancions; otherwise in very good shape. Holds air nicely, though I don't know where the pump went.
$90 usd SOLD

➡️ 1994 Rock Shox Judy XC with canti hanger; 1" threaded steerer (though I used it with a shim and aheadset since the theaded portion is short, so it has a starnut installed), steerer length is 141mm. Fork has 60mm of travel; I use it on a 1990 Yo Eddy, and it didn't mess with the geometry much at all. plush condition with White Bros fork wipers installed to replace the rubber boots. Missing decals and brake posts. - $90 usd SOLD

➡️ late 80's Salsa stem, 1" quill steel, very short, 25.8 handlebar diameter - $50 usd SOLD

➡️ Ringle Moby seatpost Easton EA70-T6, Lot 11774 26.8mm- $50 usd SOLD

➡️ Early Bontrager Mustang wheelset, 32h front and rear, laced to Deore LX hubs- $30 usd for set SOLD

➡️ Crank Bros Mallet pedals; special 2008 Interbike edition purple 3dv accents; good shape with some wear and tear. Cleats are not included $50 usd Sold

➡️ Early Chris King No Logo ano red 1" threadless headset; good shape except for deep scratch on one side of lower cup- face it towards the downtube and the headset looks great. Top cap is missing, but I will include a silver cane creek top cap that fits great if needed- SOLD $60

➡️ mtb 26" Spinergy Rev X Roks wheelset (front and rear), in good to very good condition. A couple nicks on the spokes, no cracks, rear wheel had decals removed (decals can be bought on ebay). Roll true; one wheel comes with valve extender for pumping up the tires, can be used on both wheels or second one can be bought. detailed pics below- $300 Sold

➡️ 1996 TNT Performance Products titanium seatpost 27.2 330mm length, the TNT etching looks blurred in the photo but it' not, it has some scratches, no cracks/dents- $70 Sold

➡️ Chris King Gripnut threaded headset 1" black; the race, bearings, and threads are in good shape; cosmetically there are scratches and one rub mark. Please see detailed photos with flash and without $45 Sold

➡️ Early No Logo Chris King 1" threadless headset, silver/polished, a bit dirty, non-ck top cap, race included; with a polishing will look excellent- $50 Sold

➡️ 1997 Selle Italia Flite saddle Ti rails, white label in back, yellow Flite on both sides of nose, a couple nicks in the leather but still maintained black color; rails are great. Beautiful saddle- $115 Sold

➡️ Chris King 1 1/8 Threadless headset in 3DV Purple; good condition. Complete except for the fork/lower race. Discontinued and hard to find- $115 Sold

➡️ Ringle Super Bubba 32 hole front hub in 3DV purple, good condition, decal still there, some marks from the spokes- $50 Sold

➡️ TIOGA Spyder carbonite composite saddle 145 grams listed weight, I never used it, and don't think it has ever been mounted; looks brand new- $50 Sold

➡️ Ringle Cam Twist seatpost lever QR; good shape, nice and long for those wider seatpost- $30 Sold

➡️ Moots Vintage Titanium stem. 100mm. 10 degree rise. 1" steerer. 26.0 clamp. decals are all there and have a little bit of wear- $130 Sold

➡️ Suntour XC Pro Thumbshifters, 7/8speed, missing xc pro decals, several paint chips along clamps, still has brake cables installed but will probably require changing since there is some surface rust on the cables, good mechanical condition- $20 Sold

➡️ Shimano Deore XT m734 cantilever brake set (front and back with brake pads) good shape but well used- $15 Sold

➡️ steel specialized direct drive fork, 1" threaded steerer, painted poorly in black $20 Sold

➡️ Vicious Cycle steel fork 1" diameter steerer, 7" in length, threadless; canti only; great condition- Sold

413 mm standard steerer *rim brake mounts only
a 1" steerer
b 413mm (16.25") length
c 38mm rake
true temper oversize uni-crown blades
straight blade fork

➡️ Onza Chill Pill canti cable hangers nos, four sets- two in 3dv purple and two in ano blue/turquoise Sold

➡️ Original Aheadset headset 1 1/8, made in Japan, scratched up but round, missing the lower bearings Sold

➡️ Shimano Deore XT M730 cranks (175) and complete SG chainring set (46/36/24), has rub marks, teeth are worn, but chain was not jumping last time they were used Sold

➡️ Specialized Titanium ahead style stem with a satin/natural finish, good condition 1 1/8"/130mm/0 degree rise Sold

➡️ steel GT fork, 1 1/8 threadless steerer Sold

➡️ Race Face Cranks, no rings, white (more of a creme/off white than a pure white), 94bcd, square taper; holds three sets of rings perfect, just not included Sold

➡️ Kore stem, was sold with the 1996 Zaskar, (at least it came off my original 96), in a dark blue steel color, matches the xtr m900 dark blue steel shifter color; good condition with a couple scratches 1 1/8"/130mm Sold

➡️ Kore Elite stem, great alloy stem from the late 90's, retailed for over $100 back then; this one is in excellent condition, made in the usa 1 1/8"/140mm/zero degree rise Sold

➡️ Bontrager Crowbar riser bar with brace Sold

➡️ Thumbies, Shimano Deore 7 speed, but with Friction and Index mode selection; good condition, including cables, came of an 18" frame Sold

➡️ Grove Innovations Hammerhead 1" -Sold

➡️ Specialized Titanium ahead style stem with a polished finish, specialized decal, good condition, includes stem topcap 1 1/8"/150mm Sold

➡️ Phil Wood Single Speed wheelset - relaced in 2007, bearings replaced in 2006,bike shop built, 2001 phil wood kiss-off non-disk single speed hubs, Mavic 717 xc rims (silver), DT champion spokes (silver), 32 ct, 3 cross, DT black nipples,, Phil Wood bolts for the rear wheel pics don't do justice, sweet wheelset with just 700 easy miles sincer rebuild Sold

➡️ Maxxis Hook Worms 26x2.50 freeride/urban tires, set of 2, nos with the retail wrappers still on them, not the ones that are labled downhill, so just a bit lighter...still heavy bullet proof tires Sold

➡️ Michelin Wildgripper Lite S set of tires, both front, one in better condition than the other since it newer; the older one has some crackling of the rubber, but looks great from 5 ft., very light tires Sold

➡️ Specialized Hard Rock'R tire 26x1.95 in grey with light tan sidewall, great condition, wire bead Sold

➡️ Shimano vintage platform pedals PD-MX15, 9/16", only used a few times on my 82 stumpjumper; excellent shape and hard to come by, especially in this condition Sold

➡️ Water bottle Lot of 3, two Chris King and one Vicious Cycles, large Sold

➡️ Shimano XTR M900 Crankarms in a 172.5 size; rare size, functionally pefect, some cosmetic issues with peeling & scratches; xtr label is still viewable, many detailed pics below so you can be the judge Sold

➡️ Fat Chance Yo Eddy sized Profile Seatpost 29.4/325mm nos, never been mounted, but the packaging has been thrown away. Sold

➡️ Fat chance Yo Eddy sized Mavic 29.4/208mm Seatpost; excellent condition except that is has been cut short, (too short for most ideal mtb setups), but if your yo eddy frame is a bit large for you, and you still want to keep it, or you just like to ride with your saddle low, here you go Sold

➡️ Ringle 3DV Purple front hub with blue decals, 32 hole, laced to a rim (possibly mavic), one spoke nipple is rattling around in there; hub is excellent though Sold

➡️ NOS Ringle Anti-chain suck thing, black Sold

➡️ NOS Ringle H2O Water Bottle Cage, 3DV Purple, complete with L bracket/all hardware Sold

➡️ Ringle 3DV Purple stem 1 1/8"/130mm complete with all hardware including the stem top cap, no fading, some peeling of the stickers Sold

➡️ Ringle 3DV Purple stem 1", complete with all hardware including stem top cap, lots of fading, almost looks two tone silver/lavender, no decals, some burn in from old decals and vetta sticker, excellent structural condition Sold

➡️ Thumbies- Shimano Deore XT 7 speed with 8 speed capability in friction mode (friction/index selectable), complete and in good working condition with some wear on the face of the caps, but nothing major...just needs cables Sold

➡️ Race Face headset, 1 1/8 threadless, cartridge bearings, 100% complete, even the two dust seal rings, matches well with above polished rf crankset Sold

➡️ Race Face Headset 1 1/8 threadless Judy Red, cartridge bearings, good condition, missing one dust ring, otherwise complete Sold

➡️ Marzocchi Super Fly bomber series Z2 fork, 1 1/8 steerer, 8.20" long (208mm), rebuilt recently, original open bath design Sold

➡️ Race Face forged/cnc'd cranks 110 bcd with 175mm arms, shimano SG-X big ring (xtr), early race face, check out the size scratched into the arm; look better than in the pics, have not been cleaned or polished within the last couple years Sold

➡️ 1996 Specialized Stumpjumper (small) 13.5" from center of crank to top of seat tube with a tt of 19.5". Includes Q/R Seatpost collar, shimano BB in great shape, (I believe it's a un71 but not 100 percent), brake bosses and rear derailleur hanger. No waterbottle cage bolts. No dings/dents/cracks/chainsuck...it does have a few scratches, very minor- Sold


➡️ 1989 Turbo saddle, synthetic cover, coming undone in the rear- Sold

➡️ 1 1/8 Syncros stem in m950 xtr grey, complete with stem cap, approximately 130mm to 140mm in length, some scratches, good working condition- Sold

➡️ Shimano Deore LX (Mega 9) front and rear derailleur set (front clamp is 34.9)- Sold

➡️ Mystery Purple Anodized cantilever brakes from bitd. All bits accounted for, just don't know the brand. Some corrosion on the surface of the bolts- Sold

➡️ Sugino crankset, came with a suntour XC Pro build, so it's possible these are Suntour XC Pros, but I'm not sure. 110mm crank bolt pattern with 170mm arm lengths, 46/34/26 chainrings, vuelta large with the two smaller being SR Sakae, square taper; good condition- Sold

➡️ Black Coda (cannondale house brand) clipless pedals- Sold

➡️ Black Ritchey clipless pedals, many scratches- Sold

➡️ Black lot (2 sets) of no name clipless pedals- Sold

➡️ Orange Elite bottle cage and Blue Elite bottle cage, complete with buttons- off to ebay

➡️ Rock Shox Judy SL, great condition, complete with Cantilever hanger/brace/brake bosses/dust boots with a 1 1/8" diameter steerer tube, 6 1/4" in length with starnut installed. Some pitting on the rear of the crown; not noticeable when installed. Sold

➡️ Front wheel- WTB Speedmaster [23] 11.3 rim with shimano deore lx parallax hub (32 hole/spokes), rim tape included. Solid wheel- Sold

➡️ WTB Speedmaster Cantilever brake set, (I believe these are the onjes found on page 9 of the 1995 WTB catalog). In great condition with springs; complete set for front and rear, minus the shoes. I will also be including an additional set (one wheel) to use for parts. I bought these on here, not too long ago for $121 shipped without the spare parts- Sold

➡️ Ringle Moby Deuce Seat Post Anodized Red the color has rubbed off in spots and it's been cut shorter, 26.8 size- Sold

➡️ Ringle (Sun/Ringle) front hub, silver 32 hole, some wear from the spokes- Sold

➡️ Syncros 1" quill stems (2) that accept a 26.0 handle bar, which makes them road bike stems, though a mtb handle bar might fit as well, especially with a shim. One is 110mm in length, and the other is 120mm in length. Sold

➡️ bull moose handle bar; nothing special, Taiwan made and not the 1"- Sold

➡️ shimano M737 clipless pedals; shimano's first clipless pedal; these are cosmetically rough, but still functional. Sold

➡️ Lot of four sets of barends: Concept, Profile, Icon, and Tranz-x The concept and profile have a few hand positions Sold
;)
 
shipping will be via USPS (United States Postal Service) coming out of New York City; this is a link to their website:
http://www.usps.com/tools/calculatepostage/welcome.htm

I prefer to ship via priority mail, but will also ship first class.

Corduroyboy":3as4uy4q said:
Dibs on the purple cantis please (pending shipping quote!) Cheers!

replied to pm :)

beepbeep":3as4uy4q said:
Pm sent regarding Moby :D

thanks, pm read and replied :)
 
kase1983":2600p2og said:
second dibs on the purple cantis :D

sancho":2600p2og said:
looks like I was too slow

:(

I'll give Corduroy, and each subsequent dibber, 24 hours to respond with their intention to buy.

I really need this stuff gone, the sooner the better. Thanks

Sorry, sancho, you are third right now...but pm me with anything else you might be looking for, and I'll give you the heads up before I put it up for sale.

heartbreaker":2600p2og said:


pm answered, thanks.
 
Back
Top