Hi all,
I am having a local machinist fab up some 6081 aluminum adapters to allow me to run IS calipers on my Mercedes AMP B4 frame and F3 forks (and ditch the AMP D1 caliper set up). I used the schematics posted by another member, AndrewdeKerf, back ion 2010 (see thread below).
viewtopic.php?f=1&t=108600&start=20
I should have the prototypes next week and will post pics of them fitted to the bike. Hopefully they work!
If they do, I'm happy to have more made by this shop. Researching this, it seems there are a lot of people out there that want to do the same conversion. Please feel free to lmk if interested...the more I have made at once, the cheaper it will be. The first set was $125, but that included all the design time to turn a jpeg schematic into an actual CAD DXF file or something...the next ones will be less. I estimate between $30-40 including the M5 bolts, washers and nuts needed to mount.
Stay tuned.
I am having a local machinist fab up some 6081 aluminum adapters to allow me to run IS calipers on my Mercedes AMP B4 frame and F3 forks (and ditch the AMP D1 caliper set up). I used the schematics posted by another member, AndrewdeKerf, back ion 2010 (see thread below).
viewtopic.php?f=1&t=108600&start=20
I should have the prototypes next week and will post pics of them fitted to the bike. Hopefully they work!
If they do, I'm happy to have more made by this shop. Researching this, it seems there are a lot of people out there that want to do the same conversion. Please feel free to lmk if interested...the more I have made at once, the cheaper it will be. The first set was $125, but that included all the design time to turn a jpeg schematic into an actual CAD DXF file or something...the next ones will be less. I estimate between $30-40 including the M5 bolts, washers and nuts needed to mount.
Stay tuned.