TRADE: Syncros, Ringle, Race Face, Onza, Shimano

banshee

Devout Dirtbag
Hi Retrobikers!!

First, just looking to trade for a few parts that I need for another build, none of the items below are for sale.

Below are the items I am looking for:

1. Critical Racing Stem, 1-1/8” x 135 mm, Silver and in good condition, doesn’t need the top cap but it would be nice to have.
2. Silver Seat Post with a 28.6 diameter and in good condition. I would like a Ringle Moby, Syncros Titanium or Aluminum, or any other decent 90’s, post has to be silver.
3. Race Face Bottom Bracket, 68 mm x 107 or 110 mm, should be in good condition or NOS.
4. Shimano NOS Chain, HG90, HG91 or XTR.

Note: I live in Canada

Parts I have to trade:

1. Race Face Deus Headset, includes two spacers. In great condition.
2. Race Face Turbine Crank arms, black and red powder coat, standard version, 175 mm, and includes inner chainring bolts and spacers.
3. Shimano LX M550 Crank Arms with inner chainring bolts, outer/middle chainring spacers and dust caps, 170 mm.
4. Tektro Cable Stop/Guide.
5. Backspire “The Shore” Stem, red, 90 mm, 1-1/8”, 25.4 bar clamp, 10 degree rise.
6. Thomson Elite Stem, black, 110 mm, 1-1/8”, 25.4 bar clamp, 5 degree rise.
7. Rocky Mountain Stem, silver, 1-1/8”, 25.4 bar clamp.
8. Ritchey Stem, Black, 1-1/8”, 31.8 bar clamp.
9. Outland Lock-On Grips, Gold.
10. Kalloy Seatpost, black, used, 27.0 x 410.
11. Zoom 170 Handlebar, cut down to 540 mm.
12. Rock Shox Judy SL, missing Ti hardware, use for parts, 1-1/8” x 180 mm steerer.
13. Shimano Hyperglide Cassette, CS-HG50, NOS, 7 speed, 12-28.
14. Shimano XT V-Brake Levers, BL-M739.
15. Shimano XT Thumb Shifters, SL-M730 (with 8th click for 8 speed), used for parts, clamp bolts are stripped.
16. Shimano XT Shifters, SL-M750.
17. Shimano Exage Brake Levers and Shifters Combo, ST-M320, in great condition.
18. Shimano XT Front Derailleur, FD-M735, 31.8, bottom pull.
19. Shimano XT Front Derailleur, FD-M735, 28.6, bottom pull.
20. Shimano XT Front Derailleur, FD-M750, 31.8, top pull.
21. Shimano XTR V-Brakes, BR-M951, complete set, not original mounting bolts and brake pads (new Kool Stop pads).
22. Shimano Altus Cantilever Brakes, BR-AT10, complete set, just missing one mounting bolt.
23. Avid SD 2.0 Brake Levers, NOS, grey and silver.
24. Ringle Zooka Stem, Black, in great condition, 1-1/8” x 135 mm, 0 degrees rise.
25. Race Face Chain Rings, 74 x 26T and 110 x 34T.
26. Onza RAW 140 Bar Ends, used, purple and slightly faded and scratches, new Onza end caps included.
27. Onza H.O. Cro-Mo Pedals, used with all elastomers, includes new set of cleats.
28. Shimano Clipless Pedals, PD-M959, almost NOS and in great condition, no cleats included.
29. Kalloy Seat Post, Black, 27.2 x 300 mm, great condition.
30. Ringle Moby Seat Post, 27.2 x 350, great condition and no cracks.
31. Mavic 316 Headset, 1-1/8”, missing top rubber cover and plastic ring that holds the bearings is cracked (works great but just needs some care when cleaning and greasing the bearings).
32. Seat Post Shim, 27.2 to 30.4.
33. Rock Shox Crowns and Steerers, I think Indy??? Not 100% sure, 1-1/8” x 140 mm threaded and 1-1/8” x 195 mm threadless.
34. Titec Titanium Handlebar, uncut, 555 mm.
35. Syncros Pro Series Titanium Handlebars with original logos (some a bit faded), uncut, both are 560 mm.
36. Syncros Stem, 1-1/8” x 150 mm, 5 degree rise, great condition but has small scrape by head tube bolt.
37. Syncros Seat Post, 27.0 x 325 mm, 1st Generation (came off of Rocky Mountain Titanium), was re-anodized in it’s previous life and feels a bit smaller when slid into the seat tube, maybe around 26.9 or 26.8.
38. Syncros Seat Post, 26.8 x 330 mm, cut down in it’s previous life, what a shame.
39. Syncros Powerlite Crowns and Steerers, both are for parts.
- 1-1/8” x 132 mm, threaded, crown bolts are stripped
- 1-1/8” x 150 mm, threaded, steerer threads are bad, can use with a Chris King Gripnut headset
40. Shimano Altus Crankset, FC-AT10, 175 mm.
 

Attachments

  • IMG_1673.jpg
    IMG_1673.jpg
    73.4 KB · Views: 825
  • IMG_1622.jpg
    IMG_1622.jpg
    72.2 KB · Views: 825
  • IMG_2192.jpg
    IMG_2192.jpg
    123.6 KB · Views: 825
  • IMG_2198.JPG
    IMG_2198.JPG
    123.5 KB · Views: 825
  • IMG_2199.JPG
    IMG_2199.JPG
    108 KB · Views: 825
  • IMG_2200.JPG
    IMG_2200.JPG
    108.3 KB · Views: 828
  • IMG_2204.JPG
    IMG_2204.JPG
    88.9 KB · Views: 828
  • IMG_2207.JPG
    IMG_2207.JPG
    80.6 KB · Views: 828
Re:

Very interested in the Ringle stem and seat post and the wider pair of syncros handlebars

Please let me know what you want for these.

thanks
John
 
Back
Top