A few bits no longer needed:
- Mavic/Simplex under-bar shifters - these are the NOS ones bought from ebay recently, I have used the RH shifter briefly but found it doesn't really suit 8 speed - I would say 6/7 speed only because the range of movement becomes too great. You can start/stop the range of movement where you want (XT thumbies have 3 set start positions) and adjust the strength of the click action to the point of solid hard click! so there should be no skipping gear issues. The rubber covers have cracked but you can use them fine without.
£45 UK Posted *SOLD*
m1.jpg [ 198.5 KiB | Viewed 432 times ]
m2.jpg [ 163.32 KiB | Viewed 432 times ]
- Syncros Stem 1994, 120mm length zero rise, 22.2mm shaft. Good condition, all original bolts/stem clamp, but decals removed, a couple of chips on the top bit. Very light - about 220-225g from memory.
£35 UK posted **SOLD**
s1.jpg [ 163.6 KiB | Viewed 432 times ]
s2.jpg [ 131.11 KiB | Viewed 432 times ]
s3.jpg [ 59.24 KiB | Viewed 432 times ]
s4.jpg [ 80.12 KiB | Viewed 432 times ]
- X-lite titanium seat clamp bolt, was NOS and I used it briefly only. 8mm, 50mm long with 30mm clamp space.
£6 UK posted **SOLD**
x1.jpg [ 157.82 KiB | Viewed 432 times ]