SOLD! 01) Powerlite Fork $350 - 1-1/8" in excellent condition, no real signs of rust. steerer is a whopping 186mm with 52mm thread. fork leg plugs present up top.
SOLD! 05) 2nd gen seatpost $80 - 27.2 x 425mm. nearly mint except for one light scratch to anodizing.
SOLD! 06) 3rd gen seatpost $70 - 27.2 x 425mm. excellent condition with some wear at the top, and usual insertion marks.
SOLD! 07) 3rd gen seatpost $50 - 26.8 x 330mm. decent condition, with signs of wear and fading.
SOLD! 13) 1-1/8" headset $60 - threadless. excellent condition, bearings are smooth.
SOLD! 15) Riser bar $40 - with cross beam, uncut 630mm.
SOLD! 16) Cattleprod $40 - 1-1/8" 130mm black. good condition, some paint scrapped underneath.
SOLD! 17) Cattlehead $15 - 1-1/8" 130mm silver. for spares only, no top cap. battle scared but sound.
SOLD! 19) Cattlehead $55 - 1-1/8" 130mm silver. excellent condition. with plastic top cap.
SOLD! 20) Cattlehead hinged $50 - 1" 110mm black. excellent condition. with plastic top cap.
SOLD! 22) Cattlehead hinged $55 - 1-1/8" 110mm black. excellent condition. with metal cast/forged (tarnished) top cap.
SOLD! 23) Cattlehead hinged $60 - 1-1/8" 130mm black. 10th anniversary. with new/shiny CNC metal top cap.
PART II
SOLD! 09) Pro Series EA70 flat bar $75 - black approx. 570mm/22.5" 0° sweep. logos in very good/excellent condition, particularily the middle ones. slight bar end clamp on left side.
SOLD! 04) 48T 94BCD chainring $55 - NOS gold.
SOLD! 03) 48T 110BCD chainring $65 - NOS gold.
SOLD! 11) Prohorns $35 - decent conditions, some chips to the paint and raw metal showing through in those areas. could be stripped and polished. alum (bottom)/plastic (top) plugs present.
SOLD! 10) HardCore 7075 T78 flat bar $75 - black approx. 570mm/22.5" 0° sweep. logos in very good condition, particularily the middle ones.
Cattlehead stem $55 - 1-1/8" black 140mm x 0° rise. excellent condition. hammer 'n' cycle decal at rear. with clamp & plastic stem cap
20T 58BCD chainring $30 - NOS silver.
SOLD! 05) 2nd gen seatpost $80 - 27.2 x 425mm. nearly mint except for one light scratch to anodizing.
SOLD! 06) 3rd gen seatpost $70 - 27.2 x 425mm. excellent condition with some wear at the top, and usual insertion marks.
SOLD! 07) 3rd gen seatpost $50 - 26.8 x 330mm. decent condition, with signs of wear and fading.
SOLD! 13) 1-1/8" headset $60 - threadless. excellent condition, bearings are smooth.
SOLD! 15) Riser bar $40 - with cross beam, uncut 630mm.
SOLD! 16) Cattleprod $40 - 1-1/8" 130mm black. good condition, some paint scrapped underneath.
SOLD! 17) Cattlehead $15 - 1-1/8" 130mm silver. for spares only, no top cap. battle scared but sound.
SOLD! 19) Cattlehead $55 - 1-1/8" 130mm silver. excellent condition. with plastic top cap.
SOLD! 20) Cattlehead hinged $50 - 1" 110mm black. excellent condition. with plastic top cap.
SOLD! 22) Cattlehead hinged $55 - 1-1/8" 110mm black. excellent condition. with metal cast/forged (tarnished) top cap.
SOLD! 23) Cattlehead hinged $60 - 1-1/8" 130mm black. 10th anniversary. with new/shiny CNC metal top cap.
PART II
SOLD! 09) Pro Series EA70 flat bar $75 - black approx. 570mm/22.5" 0° sweep. logos in very good/excellent condition, particularily the middle ones. slight bar end clamp on left side.
SOLD! 04) 48T 94BCD chainring $55 - NOS gold.
SOLD! 03) 48T 110BCD chainring $65 - NOS gold.
SOLD! 11) Prohorns $35 - decent conditions, some chips to the paint and raw metal showing through in those areas. could be stripped and polished. alum (bottom)/plastic (top) plugs present.
SOLD! 10) HardCore 7075 T78 flat bar $75 - black approx. 570mm/22.5" 0° sweep. logos in very good condition, particularily the middle ones.
Cattlehead stem $55 - 1-1/8" black 140mm x 0° rise. excellent condition. hammer 'n' cycle decal at rear. with clamp & plastic stem cap
20T 58BCD chainring $30 - NOS silver.
