Barneyballbags
Old School Grand Master
- Feedback
- View
I don't know whether these are eligible to sneak in pre 1998 or not, but I thought that they might interest someone.
Complete set of Hope Minis
Braided Hoses
180/160 wavey rotors
Now, the snag. I've stripped some of the threads on one of the front mounts
There's still about 50% thread left in there, so a longer bolt should hold it in place just fine. I just fancied a different set of brakes, so this was the perfect excuse
Everything else is in absolutely excellent condition and the brakes work faultlessly.
£60 posted to the UK
This is the best I can capture the threads. They're about 50% gone. It was my own fault as I was using a lot of washers, so the bolt didn't thread all the way into the caliper. A longer bolt (or using less washers between caliper and fork!) would sort it out I'm sure.
REAR Caliper (no. 3 - IS 160mm)
REAR Lever:
REAR Brake:
FRONT Caliper (no. 3 - IS 180mm)
FRONT thread damage:
FRONT Lever:
Complete set of Hope Minis
Braided Hoses
180/160 wavey rotors
Now, the snag. I've stripped some of the threads on one of the front mounts
There's still about 50% thread left in there, so a longer bolt should hold it in place just fine. I just fancied a different set of brakes, so this was the perfect excuse
Everything else is in absolutely excellent condition and the brakes work faultlessly.
£60 posted to the UK
This is the best I can capture the threads. They're about 50% gone. It was my own fault as I was using a lot of washers, so the bolt didn't thread all the way into the caliper. A longer bolt (or using less washers between caliper and fork!) would sort it out I'm sure.
REAR Caliper (no. 3 - IS 160mm)
REAR Lever:
REAR Brake:
FRONT Caliper (no. 3 - IS 180mm)
FRONT thread damage:
FRONT Lever:
