LOADS - some frames & bits - Update 15th August

Back up and running again. Unfortunately I've had to withdraw the '88 Stumpy, it has had to be put to in to service. I've managed to lose PMs of who wanted what so it's all up for grabs again. Priority will go to those attending the Downs ride at the weekend and are able to collect there.



Hi Folks,

As most of you probably know, I was diagnosed with cancer a few months ago. Full story here if you want a read:

viewtopic.php?f=8&t=257080

As some of you have commented I seem to be dealing with it rather well. I am, thanks in part to the good people at The Olive Tree a cancer support charity local to me who have been helping me out. If it wasn't for their support I don't think I'd be doing quite as well as I am.

In the spirit of karma I am trying to help them by raising some funds for them. I've had bit of a sort out in the man cave and I have the below list of stuff to offer to the good folks of Retrobike.

Here's the dealio. I will post out within the UK at my expense for the smaller items, bigger items are collection only. To make it easier I live relatively close to the Surrey Hills National Ride and stuff can be collected at the ride. All I ask in return is that once you've received it, you make a donation to The Olive Tree via my JustGiving Page for whatever you think the stuff is worth to you. I will also be trekking up Snowdon in September to raise additional funds for them, if you don't want any old bike bits but want to make a donation any way then please feel free!

Please bear in mind that time is tight for me, I will probably only be able to post out on a Saturday so you may be waiting a short while for stuff.

Righty, here we go. Some bits photographed. PM me if you want more pics/details. Please PM me if you're interested in anything. Please assume that all items are still available until I post up that they're taken. Dibs count for nothing.

Saracen built Tange Prestige frame with Kona P2 Forks
16" c-c seat tube 22" TT
Plain gauge Kona P2 forks
Ritchey drop outs
These frames rides really nicely
Collection only on this, please do not ask me to post

Saracen (I think) 1 1/8" threaded steel forks, 390mm a-c

RIMS & TYRES
Marin quake 7.0 front tyre, used collection only
Mavic 121 ceramic rim, used collection only
Mavic D521 rim, used, wear to the anodized braking surface collection only
One-One Reetard rim. Used with discs, approx 20 miles with rim brake collection only

BRAKES
Cane Creek 200TT NOS single brake lever, Ideal for your fixie with low pro bars
Weinemann front brake
Tektro canti rocker, NOS in packet
Diacompe X-1 cantis, one ends worth, with pads, used
Shimano BL-M600 LX front v-brake lever, no cable adjuster unless I can find one, used

CRANKS & BITS
TA triple cranks, monster 180mm, no rings but with granny spacers, used
Lasco tripple cranks & rings, little use

BARS, STEMS & HEADSETS
Unbranded 11/4" quill stem 130mm ~15 degrees rise, used
11/8" Control Tech quill stem 130mm flat, well used with all important rubber bung
11/8" Chrome steel ahead stem, 130mm ~15 degrees rise
11/8" with 1" shim 3T The Stem 100mm ~15 degrees rise NOS in packet 2 available

SEAT POSTS
28.6mm Kalloy seat post ~35cm, used
26.2mm Selcof seat Post ~40cm, used
26.2mm Kalloy seat post, faded purple ano, ~30cm

MECHS & SHIFTERS & BITS
M569 LX 8 speed shifter, used, working
Shimano SM-AD11 31.8mm braze on to band on front mech adapter, used
Exage 300EX road rear mech, no jockey wheels, used
Exage 300EX road double front mech 28.6mm BP, used
M550 Shimano LX 28.6mm BP front mech, used
28.6mm Shimano STX-RC front mech, used
31.8mm Shimano STX-RC front mech, used
28.6mm Shimano XT BP front mech, used

OTHER BITS
GT-All Terra seat post QR, used
Deore XT (M737?) rear QR, used


Link to my JustGiving Page - It's a great cause

TAKEN
Set F&R of Hope C3 disc brakes. Need a service, pads move though.
540mm Control Tech flat bar in silver, ends crimped by ham fisted fitting of bar ends
560mm Ritchey FD-6061T6 flat bars in black, used
11/8" Cane Creek aheadset, no top cap, silver, used
Sram Attack 9 speed grip shift (Shimano compatible) with Sram X9 front & grips, used
Pair of Campag Crank bolts NOS
Shimano Altus C-10 brake levers, used
Bag of black LX cantis with bolts, no pads or straddles, used
Kona Impact headset 11/8" in silver with bearings, used
27.2mm Syncros seat post, scuffed, scratched & faded, I was planning to polish it, ~33cm

Re: 88 Stumpy, some frames & bits, some road - all karma

Syncros post please bud

Re: 88 Stumpy, some frames & bits, some road - all karma

I am interested in the hope brakes, the Saracen frame and the mavic rims.
I have PM-ed you.

Re: 88 Stumpy, some frames & bits, some road - all karma

There is nothing I want on the list but was very touched by your story and want to help. I work as an Intensive care nurse and I see a lot of people with cancer. It's amazing how much difference a positive attitude makes! Kick it's Ar$e! I've just added a tenner to your just giving page.
All the best,

Dave

Re: 88 Stumpy, some frames & bits, some road - all karma

Hi

Do any of the seat posts you have for sale fit the Trek 990 frame? Need a seat post for a 950 I'm building of same vintage!

Thanks

Re: 88 Stumpy, some frames & bits, some road - all karma

Hi,

'Kona Impact headset 11/8" in silver with bearings, used' and 'Bag of black LX cantis with bolts, no pads or straddles, used' Please.

I will of course donate. Good Luck, Joio byw!

Re: 88 Stumpy, some frames & bits, some road - all karma

Great karma, inspiration attitude, good luck to ya!

Re: LOADS - 88 Stumpy, some frames & bits - Update 29th July

Updated bump.

Re: LOADS - 88 Stumpy, some frames & bits - Update 29th July

If they're still available I'm interested in:

Sram Attack 9 speed grip shift (Shimano compatible) with Sram X9 front & grips, used

Chapeau on your fine gesture.

Re: LOADS - 88 Stumpy, some frames & bits - Update 30th July

Hi,

Just sent you a pm....thanks