Back up and running again. Unfortunately I've had to withdraw the '88 Stumpy, it has had to be put to in to service. I've managed to lose PMs of who wanted what so it's all up for grabs again. Priority will go to those attending the Downs ride at the weekend and are able to collect there.
Hi Folks,
As most of you probably know, I was diagnosed with cancer a few months ago. Full story here if you want a read:
viewtopic.php?f=8&t=257080As some of you have commented I seem to be dealing with it rather well. I am, thanks in part to the good people at
The Olive Tree a cancer support charity local to me who have been helping me out. If it wasn't for their support I don't think I'd be doing quite as well as I am.
In the spirit of karma I am trying to help them by raising some funds for them. I've had bit of a sort out in the man cave and I have the below list of stuff to offer to the good folks of Retrobike.
Here's the dealio. I will post out within the UK at my expense for the smaller items, bigger items are collection only. To make it easier I live relatively close to the Surrey Hills National Ride and stuff can be collected at the ride. All I ask in return is that once you've received it, you make a donation to The Olive Tree via my
JustGiving Page for whatever you think the stuff is worth to you. I will also be trekking up Snowdon in September to raise additional funds for them, if you don't want any old bike bits but want to make a donation any way then please feel free!
Please bear in mind that time is tight for me, I will probably only be able to post out on a Saturday so you may be waiting a short while for stuff.
Righty, here we go. Some bits photographed. PM me if you want more pics/details. Please PM me if you're interested in anything. Please assume that all items are still available until I post up that they're taken.
Dibs count for nothing.
Saracen built Tange Prestige frame with Kona P2 Forks
16" c-c seat tube 22" TT
Plain gauge Kona P2 forks
Ritchey drop outs
These frames rides really nicely
Collection only on this, please do not ask me to post
Saracen (I think) 1 1/8" threaded steel forks, 390mm a-c
RIMS & TYRES
Marin quake 7.0 front tyre, used
collection only
Mavic 121 ceramic rim, used
collection only
Mavic D521 rim, used, wear to the anodized braking surface
collection only
One-One Reetard rim. Used with discs, approx 20 miles with rim brake
collection onlyBRAKES
Cane Creek 200TT NOS single brake lever, Ideal for your fixie with low pro bars

Weinemann front brake

Tektro canti rocker, NOS in packet

Diacompe X-1 cantis, one ends worth, with pads, used

Shimano BL-M600 LX front v-brake lever, no cable adjuster unless I can find one, used
CRANKS & BITS
TA triple cranks, monster 180mm, no rings but with granny spacers, used

Lasco tripple cranks & rings, little use
BARS, STEMS & HEADSETS
Unbranded 11/4" quill stem 130mm ~15 degrees rise, used

11/8" Control Tech quill stem 130mm flat, well used with all important rubber bung

11/8" Chrome steel ahead stem, 130mm ~15 degrees rise

11/8" with 1" shim 3T The Stem 100mm ~15 degrees rise NOS in packet 2 available
SEAT POSTS
28.6mm Kalloy seat post ~35cm, used

26.2mm Selcof seat Post ~40cm, used

26.2mm Kalloy seat post, faded purple ano, ~30cm
MECHS & SHIFTERS & BITS
M569 LX 8 speed shifter, used, working

Shimano SM-AD11 31.8mm braze on to band on front mech adapter, used

Exage 300EX road rear mech, no jockey wheels, used

Exage 300EX road double front mech 28.6mm BP, used

M550 Shimano LX 28.6mm BP front mech, used

28.6mm Shimano STX-RC front mech, used

31.8mm Shimano STX-RC front mech, used

28.6mm Shimano XT BP front mech, used
OTHER BITS
GT-All Terra seat post QR, used

Deore XT (M737?) rear QR, used
Link to my JustGiving Page - It's a great causeTAKEN
Set F&R of Hope C3 disc brakes. Need a service, pads move though.

540mm Control Tech flat bar in silver, ends crimped by ham fisted fitting of bar ends

560mm Ritchey FD-6061T6 flat bars in black, used

11/8" Cane Creek aheadset, no top cap, silver, used

Sram Attack 9 speed grip shift (Shimano compatible) with Sram X9 front & grips, used

Pair of Campag Crank bolts NOS

Shimano Altus C-10 brake levers, used

Bag of black LX cantis with bolts, no pads or straddles, used

Kona Impact headset 11/8" in silver with bearings, used

27.2mm Syncros seat post, scuffed, scratched & faded, I was planning to polish it, ~33cm